Depends on the model
Yes
None
Do not attempt this. Have it done by a gunmsith.
Open bolt and pull to rearword position.Then pull trigger and hold in back position.Bolt will now slide out.Hold trigger back to reinstall
It is very easy to adjust the trigger on a Model 700 Remington. Remove the rifle from the stock and there is 3 small screws you can adjust. One is for the lbs. of trigger pull, which be careful you don't make it so easy it's a hair trigger and could go off just by the jar from closing the bolt. The other is to adjust the length of trigger pull.
DO NOT ATTEMPT TO ADJUST THE TRIGGER PULL!!!!!!!!!!!!!!!!! Danger, Danger, Danger. It is no older than when the 300 WSM was introduced (2001)
Both! You can cock the hammer and pull trigger for single action. Or, for double action just pull the trigger straight through.
It all depends on the model. Usually you aim and pull the trigger.
On "Rimfire chat" I read the following.. If you "flip the sear spring" the trigger pull will change from about 5 lb's down to about 2 lb's.
Loading one depends on the model. To fire a BB gun, you pull the trigger.
Try gunbroker. Pull up Stevens 56.