any dart gun has to have some kind of power to shoot the dart. this power comes either from springs or compressed air. with springs, when you cock back the gun it pulls back whats called a plunger. once you pull the trigger, the plunger is released and pushes air out of the gun, thus shooting the dart. with a compressed air gun, a pump is used to build up PSI (pounds per square ince) in an air tank. once its full, pulling the trigger releases a strong berst of air that propells the dart
One that you have to manually pump the forarm up to build enough pressure in the air tank to fire the gun.
If you are asking about Air Soft, then most likely not. But if you are asking about a BB or pellet gun then Yes it is possible depending on the power of the air gun and where you are struck.
Gun with a spring force acts. Hydraulic power water gun works. Pneumatic power iscompressed air.
Because of the nature of the PCP power plant I suggest you search the net and look for air gun repair or air gun tune-up. There are shops that tune up air rifles and modify them.
NO- they shoot large diameter plastic BBs. In general, they do not have the power of the traditional BB gun.
Adding any kind of "propellent" into the compression chamber is bad for the gun, it'll burn the piston seal after a while causing loss in power. Kinda ironic isn't it? If you want to get more power, get the gun tuned by a pro air gun tuner, or, buy a gun with more power.
Most people would send it out to a professional Air gun "tuner" and have it tuned. I suggest you do a web search on "air gun repair" or see the link below
A BB gun uses compressed air to push a round steel "BB" out of a smoothbore barrel. It does not have the power, range, or accuracy of a firearm.
The materials you might need to build a bar include: Clamps, miter saw, air compressor, air hose, brad nail gun, cordless drill, bar moulding, and a beer tap kit.
A brad gun, as the name implies, is a power tool that shoots brads, a kind of a small nail. Brad guns are usually powered by compressed air.
Check your brake power booster