Best bet is to find a gunsmith
Ask a gunsmith for help
How far is the firearm disassembled? The gun has not been taken apart yet would like to clean it properly
To disassemble a Jennings Bryco .380 for cleaning, first ensure the firearm is unloaded and remove the magazine. Next, pull back the slide slightly and push the slide stop pin out from the left side of the frame. Once the slide stop is removed, you can slide the slide off the frame, followed by removing the recoil spring and barrel. Clean each component thoroughly before reassembling in the reverse order.
Best to ask a gunsmith for help
To field strip a Jennings T380 pistol, start by ensuring the gun is unloaded. Then, remove the magazine and retract the slide to eject any chambered round. Rotate the takedown lever downward, push the slide forward, and then lift it off the frame. From there, you can access and clean the internal components as needed. Always follow the manufacturer's instructions and handle firearms safely.
No
Recommend you ask a gunsmith for help
Request a manual from the maker.
To fix the safety on a Bryco 38 (also known as Bryco 380), first ensure the firearm is unloaded and follow proper safety protocols. Inspect the safety lever for any debris or damage that might be preventing it from engaging properly. If the lever is stuck, it may require disassembly to clean or replace any worn components. If the issue persists, consulting a qualified gunsmith is recommended for a thorough inspection and repair.
dissasemble pistol. check on line sites re: cleaning the 45 cal. pistol
A tendency to jam if not kept clean.
Clean Break - novel - has 169 pages.