Find a gunsmith or contact the company and ask for a owner's manual. place a want ad, check local gun shows, the library.
On the right hand side of the gun, just above the trigger guard, is a switch, if you look closely you can read the word "disassembly" with an arrow pointing to the front of the gun. You will have to work the slide until a groove is above the switch allowing you to push it forward. Once you have moved the switch pull back the slide and let it fall, repeat this motion until the top of the gun, action/barrel begins to separate from the grip. You should then be able to pull the parts apart.
Best to ask a gunsmith for help
To field strip a Beretta 1934 .380, first ensure the firearm is unloaded by checking the chamber and magazine. Next, pull the slide back slightly and engage the slide stop lever to lock it in place. Remove the slide by pushing down on the slide stop and pulling the slide forward off the frame. Finally, you can remove the recoil spring and barrel from the slide for further cleaning or maintenance.
Yes but you may strip a piston.
go to: Forum.m1911.org they show you how to strip a 45...........................
Get Raf Hussan to do it as he is a expert in this field as his cousin is Saddam Hussein
One does not field-strip a Colt detective special. Any repairs or adjustments should be left to a qualified gunsmith.
Best to ask a gunsmith for assistance
Best to ask a gunsmith for help. Various models and not all strip the same.
Ask a gunsmith for help
You can get a manual from Colt
Best to ask a gunsmith for help.
http://www.weaponvideos.org/videolist/videonew/?tags=field http://www.weaponvideos.org/videolist/videonew/?tags=field