0
What else can I help you with?
What is the difference between a silo and a tank?
There is no difference. Both are usually round, both some times are open top, a silo is a tank. PE API650 Tank Engineer 2007
What is the difference between PE80 AND PE100?
from : Engineeringtoolbox.comPolyethylene pipes are also classified by the type of material used:PE 32 - low pressure piping systemsPE 40 - low pressure piping systemsPE 63 - medium pressure piping systems - irrigation system - drinking water connectionsPE 80 - gas pipe for natural gas distribution network with pressure rate up to 4 bars - drinking water pipe with pressure rate up to 16 bar - sewers, outfall pipes, industrial pipesPE 100 - high demands piping applicationsThe Minimum Required Strength - MRS - according ISO 4427 for the different materials are:Designation of materialMRS at 50 years and 20oCMpa (bar)PE 10010 (100)PE 808 (80)PE 636.3 (63)PE 404 (40)PE 323.2 (32)
In the electrical system of the US what is the difference between the neutral and the PE Ground?
US NEC: The neutral conductor is an insulated grounded conductor used as the current return in a circuit. The color designation for neutral is white. The protective ground (PE, protective - earth) is a non-insultated grounding conductor used to shunt fault current to ground, tripping the protective device. The color designation for PE ground is green. Neutral and PE ground are tied together at the distribution panel. PE ground is also connected to a solid earth ground, such as grounding rods driven into the earth. Downstream of the distribution panel, PE ground is never used to carry operational current. Any current flow on PE Ground, other than parasitic current, is considered a ground fault, which must be corrected. In fact, GFCI (Ground Fault Current Interrupting) breakers will trip when neutral current does not match hot current, an indication of PE ground current flow.
What do the initials pe stand for when typed after an engineer's name?
PE stands for Professional Engineer.
Difference in a masters in mechanical engineering and professional engineer?
Professional engineer requires an exam and is open to anyone with a degree that does not have to be a a Master's. Successful pass of the exam gives youa license to stamp drawings and such that is required in special professions but most not. A Master's degree gives you advance knowledge and courses.
Is there a difference between PE and sports?
PE is physical education so I say it isn't
What is the difference between normal kickball and the PE version?
there are corners in the P.E one understand
What is the difference between Sudafed and Sudafed pe?
The difference between Sudafed and Sudafed PE is that Sudafed contains pseudoephedrine and Sudafed PE contains phenylephrine. While phenylephrine doesn't work quite as well as a decongestant, it is the most common decongestant ingredient in cold and sinus formulations, due to the fact that people were using pseudoephedrine to make the illegal drug methamphetamine.
What is the difference between SoC and NoC?
System on chip- has custom IF, custom PE to PE protocol, direct communication. Network-on-chip has router IF, packet based protocol, wormhole communication
What's the difference in software between PE Design version 7 and version 8?
The lite version does not have file exporting.
What is the difference in PE pellets and PVC pellets?
one is made out of PE, the other is made out of PVC
What is the difference between a silo and a tank?
There is no difference. Both are usually round, both some times are open top, a silo is a tank. PE API650 Tank Engineer 2007
What is scrapping tool?
It is a tool which is used during electro fusion (plastic welding) When the PE pipes are out on the job site they are exposed to light from the sun but also dirt from the ground. But the PE pipes due to the ultraviolet light from the sun it will make an oxyd layer on the out side of the pipe. To assure a correct and binding connection between the electro fittings and the welded pipe you have to use a scrapping tool to remove this oxyd layer.
What is the difference between PE80 AND PE100?
from : Engineeringtoolbox.comPolyethylene pipes are also classified by the type of material used:PE 32 - low pressure piping systemsPE 40 - low pressure piping systemsPE 63 - medium pressure piping systems - irrigation system - drinking water connectionsPE 80 - gas pipe for natural gas distribution network with pressure rate up to 4 bars - drinking water pipe with pressure rate up to 16 bar - sewers, outfall pipes, industrial pipesPE 100 - high demands piping applicationsThe Minimum Required Strength - MRS - according ISO 4427 for the different materials are:Designation of materialMRS at 50 years and 20oCMpa (bar)PE 10010 (100)PE 808 (80)PE 636.3 (63)PE 404 (40)PE 323.2 (32)
What is the difference in Joules in the gravitational potential energy of a 7.75 kg book that is 1.50 m above the ground and a 9.53 kg book that's is 1.75 m above the ground?
To calculate gravitational potential energy, the formula is PE = mgh, where m is the mass, g is the acceleration due to gravity, and h is the height. In this case, the difference in potential energy between the two books is: PE = (m1gh1) - (m2gh2). Plugging in the values we have, we can calculate the difference in Joules.
Meaning of grade material PE-6 in hdpe pipe?
Answer I'm no expert here with this but through minimal experience with HDPE pipe, PE stands for polyethylene and is used for water supply because polyethylene is neutral in water - meaning nothing in polyethylene reacts with water which would seep into the water. There are different pressure grades "PN" which must be considered for your specific use. PN 2.5 through PN16 indicate how much pressure the pipe can withstand.
What is the difference between Mucus Relief DM and Mucus and Sinus Relief PE?
DM stands for DextroMethorphan which is a cough suppressantPE stands for PhenylEphrine which is a decongestant
