Yellow line while driving means the other sides traffic is opposite from yours. White line means same direction.
The difference: Unmagnetized iron atoms, are not coordinated to each other, while magnetized are coordinated, like this:nsnsnsnsns, etc, in long parallel lines
Parallel means 2 straight lines that never meet. You can continue drawing the lines forever and they do not cross. They can travel in any direction but they most be travelling the exact same way and have the same distance between them no matter what. A circuit, however is 1 closed line (similar to a circle) that has no beginning or end. It can be in any shape but it must be closed.
Spirit levels can have several possible colours of fluid, including yellow, blue, green and red. The fluid used is often naturally clear, with a dye added. Yellow is the most common colour. This may be because yellow and black (the colour of the lines marked on the tube) are a very good contrast.
by submerging it into a glass of water that has measurement lines and taking the difference between the original amount of water and the water with the object in it.You would use water displacement to find the volume of an irregular object.
In wiring or cabling, high voltage lines and low voltage lines should be separately installed. High voltage lines which carry AC 120V/208V/277V/480V should be installed in one conduit, and low voltage lines which carry DC 12V/24V/48V and non-current carrying lines should be installed in another separated conduit. It is one of the strict requirement of NEC. When AC 120V wires and DC 12V wires are laid inside of one rack, they should have spaces more than 6 inches between them. - dona
The difference between interior lines and exterior lines are thatInterior lines: Are the lines that are in the inside of the shape or whatever you are trying to find the interior of.Exterior Lines: Are the lines that are outside of the shape or whatever you are trying to find the exterior of.
vertical lines run from top to bottom, horizontal lines run from left to right the difference between the two is 90 degrees if you place vertical lines next to horizontal lines.
It would be the difference between the two darker lines, or index lines, and then divide the space in between with your difference.
we have textbooks
The transversal is the line that cuts the parallel line.
contour lines
The only difference between perpendicular lines and intersecting lines is that perpendicular lines create a right angle at the point of intersection.
The difference between intersecting and parallel lines is that, on a graph parallel lines do ont touch,cross or anything. THEY NEVER TOUCH. intersecting lines touch, or cross eachother.\
jsdba'
Different Patterns
the elevation difference between two adjacent contour lines.
The elevation difference between two adjacent lines.