When you use flock you should not put it through the filter.When vacuming flock out of a pool with a sand filter you vacuum to waste. However you don't have that luxury with a cartridge filter. The ideal solution would be to put a 3 way valve between the pump and the filter and set it up so that one of the ports can be run to waste while at the same time shutting of the water to the filter.
Yes, the 3.6L filter is a cartridge.Yes, the 3.6L filter is a cartridge.
It is a paper cartridge filter.It is a paper cartridge filter.
A cartridge filter is inside an assembly as an element is its own assembly.
yes thats what i use in mine works just as good
No, a Hayward pool filter cannot run effectively without a cartridge. The cartridge is essential for trapping debris and contaminants from the water, ensuring proper filtration. Operating the filter without a cartridge can lead to damage, reduced water quality, and potential issues with the filter's performance. Always ensure that the cartridge is in place and properly maintained for optimal filter operation.
Replacement filter cartridges can vary in price depending on the filter that the cartridge is inserted to. In general, a replacement filter costs about 40 dollars.
Less maintainance with sand you just backwash, and change sand every four years. Cartridge filters clog and have to be taken out and cleaned often. Use sand it is hands down a better system.
Cartridge is not installed correctly or you have a crack in the manifold allowing dirty water to pass by the filter.
the water filter cartridge is broke off in the water filter housing. how can I get the broken part out. Kenmore 106.52582202 sise by side.
If you can blow through the filter with no constrictions it's fine.
Yes, you can typically use a pump that was previously used with a cartridge filter for a sand filter, as long as the pump's specifications are compatible with the sand filter's requirements. However, you should ensure that the pump’s flow rate and horsepower match the needs of the sand filter system to ensure optimal performance. Additionally, it may be necessary to adjust the plumbing connections to fit the new setup. Always refer to the manufacturer's guidelines for both the pump and filter to ensure proper compatibility.
It is on the top of the engine next to the fuel filter. It is a cartridge filter, not a spin on filter.