Yes, but quarter round or shoe molding may be more attractive.
caulk it
they're both used for the same purpose i.e. fill joints and cracks between building materials. They're also both applied with a caulking gun. sealant is used when there will be expansion and contraction and thermal changes. caulk is recommended in a opposite scenario where expansion and contraction are not an issue because caulk will eventually dry and crack if there's movement. caulk can be painted, sealant cannot.
To caulk is to fill the cracks of a container which is intended to contain liquid (like a barrel or bucket or bathtub) with a substance which will seal the cracks and make the container waterproof. You can caulk anything which is intended to be waterproof, including things which are intended to keep water out (a roof, the hull of a ship).
previous answer is typical. Hire a PLUMBER!!
Kids Fill the Floor was created on 2001-05-07.
Yes, 1/2 inch supply to fill boiler will work fine. Piping going to baseboard heaters needs to be sized properly. 1/2 inch piping to baseboard heaters not recommended. Most hot water baseboard heaters piped with 3/4 pipe.
Diamond Brite can be repaired. To repair a surface, cut out the crack 1/2 inch deep and fill it in with caulk. Allow to dry, fill the pool and it's ready to use.
Defference between fill in & fill out
under driver's floor board. there is a hole in the floor to fill it.
Caulking guns are used to fill in cracks around windows and bathtubs. This fills in the cracks and prevents water from getting in as the caulk is water resistant.
difference between engineered fill and non engineered fill material
Put the milk on the floor and get the cat.