You would be better of removing the plywood floor completely - and tiling over the original surface.
Mainly all it involves is removing old flooring and getting down to your basic floor structure. Tile can usually be laid over any surface that is in good condition. If there are bumps, tears, or anything like that its going to involve a little sanding to even the surface up.
If you are talking about a house, the attic would be on the third floor as you have a ground floor (first floor), then a second floor (upstairs) and then a third floor (the attic), However if it was a bungalow, it would be on the second floor because bungalow's don't have an upstairs.
floor
The floor of a rectangular deck has an area of 600 sq. ft. The floor is 20 ft. wide. How long is the floor?45
A vaccuum with a soft brush is the best thing to clean laminates with. If they need a washing, use simple hot water to damp mop. Be careful not to soak the floor. There are cleaners available for laminates, but most manufacturers recommend the hot water instead, due to resdue issues.
First you have to prepare the surface, by cleaning it and removing any objects. Next you must sand the floor. After sanding removing the sanded particles. Then you must stain the floor.
can i get money to help me replace my rotten kitchen floor. i am on disability.
Get a professional to do it.
I wouldn't. How are you supposed to keep the grounds in the scratch indentations? Contact the mfg. of the flooring or go to a home improvement store to see if there is a product that will "color" the scratched area so it matches the rest of the floor. The problem with laminates is that the actual laminated surface is very thin and if you scratch through it into the backing material, any moisture on the floor will seep into the backing causing it to swell and warp. Also, laminates are not designed to be "refinished".
Vinyl is the only "no wax" floor I am aware of and removing the wax should not damage the vinyl finish. You can get removal products at most flooring stores that are specifically designed for this purpose. I took the "no wax" wax off my "no wax" floor and it looked better than ever.
You would be better of removing the plywood floor completely - and tiling over the original surface.
Depending on the size of the floor that you are replacing, installing a vinyl floor can be a weekend project. There are a number of steps to take before actually installing the floor, such as removing the original flooring, and prepping the floor for the new installation.
With a deep floor flange Or a wax seal with a horn and extra long Brass floor flange bolts
I don't know why gin stains vinyl tile, but we've found that Magic Eraser does the job of removing it. However, it leaves a dull spot, so you need to apply some floor wax after removing the stain.
about 3.50
Removing dirt, dust or sand from the floor. Sweep the floor properly with a broom which has soft bristles. After that use one soft dry cloth to clean it. mngranite.co