To install hardwood, first you need a bare floor, then you install the lined paper barrier, then you nail in the hardwood strips, sand it down, and then add a finish such as poly.
If it sits over a cement floor, then no. If it is a nailed down floor, then you can, but you still have to install a cement board.
No, parquet has been known to buckle because he moisture in the cement has nowhere to escape too.
You can. You start by applying moisture barrier to the concrete--flooring stores have it--then gluing the hardwood to the concrete.
Nope, you need to take out the old one, i believe. Edit - No, I disagree with this. This depends on the situation. If you have a hardwood floor installed on top of plywood, it is generally better to remove the hardwood and replace it. But, if there is no subfloor (and this is sometimes the case in the older homes in our area), then sometimes it is actually fine to install on top of the hardwood. The hardwood (or often pine if it's older) then becomes the subfloor and then you can nail on top of that. It is important, though, that the hardwood is installed perpendicular (or diagonal to that) for better installation. Oh, and it's important to look at heights and make sure there is enough clearance for the wood and that doors can be opened (or shaved).
To install hardwood, first you need a bare floor, then you install the lined paper barrier, then you nail in the hardwood strips, sand it down, and then add a finish such as poly.
If it sits over a cement floor, then no. If it is a nailed down floor, then you can, but you still have to install a cement board.
No, parquet has been known to buckle because he moisture in the cement has nowhere to escape too.
The DIY network offers instructions for you. You can find them through this link, http://www.diynetwork.com/how-to/how-to-install-a-hardwood-floor/index.html.
We decided to do a carpet design in the playroom using carpet squares. What is the best way to install carpet squares on a cement floor?
I have done this and I always have the hardwood installed first. Then I install the ceramic tile. To protect the hardwood floor from getting grout or glue on it I cover the hardwood floor with a soft cover (to prevent scratches) and tape it down. Then place a plastic cover over the hardwood. Then I can install the ceramic tile at the edge of the hardwood creating hardly or no seem and level with the hardwood. When its done it looks beautiful.I would install the tile first , that way you don't risk getting glue or grout on your hardwood.
No, laminate is floating type of floor installed over an insulation pad. Hardwood floor has to be nailed, stapled or glued to the subfloor. If you do manage to install hardwood on top of laminate sooner or later your Laminate floor will expand due to high temperature or humidity and it will create gaps between hardwood planks.
One is able to find tips on how to install hardwood flour at several different online places such as the following: Wiki How, Hardwood Installing, and Wikipedia.
If you're installing hardwood floor boards over a strong 3/4 inch plywood sub-floor, then yes, you can install the hardwood floor parallel to the joists. If your sub-floor is weak, then you should fix the subfloor.
No, laminate is floating type of floor installed over an insulation pad. Hardwood floor has to be nailed, stapled or glued to the subfloor. If you do manage to install hardwood on top of laminate sooner or later your Laminate floor will expand due to high temperature or humidity and it will create gaps between hardwood planks.
See attached link for an easy how to install wood flooring guide.
Almost any store that sells hardwood floor in your area can deliver it and have it installed. If they don't install, they certainly can refer you to someone that can.