A barrel with a full choke.
only if your choke is improved cylinder or modified, full chokes are a no,no. the barrel will bulge or burst!
Browning Choke Markings "* " = full "*- " = improved modified "** " = modified "**-" = improved cylinder "**$" = skeet "***" = cylinder
50-500 usd
BROWNING CHOKES AND THEIR CODES (ON REAR LEFT-SIDE OF BARREL)'*' designates full choke (F).'*-' designates improved modified choke (IM).'**' designates modified choke (M).'**-' designates improved cylinder choke (IC).
NOT RECOMMENDED unless you are in a life or death situation.
50-500 usd
This project should be probable.I would have a competent gunsmith give you a quote for threading the barrel to except the Invector plus choke system.
BROWNING CHOKES AND THEIR CODES (ON REAR LEFT-SIDE OF BARREL)* designates full choke (F).*- designates improved modified choke (IM).** designates modified choke (M).**- designates improved cylinder choke (IC).**$ designates skeet (SK).*** designates cylinder bore (CYL).INV. designates barrel is threaded for Browning Invector choke tube system.INV. PLUS designates back-bored barrels
You must call Browning in order to make sure you don't void your warranty.
As long as the barrel was made after 1950 and does NOT have a full choke, you will be able to shoot steel #2 or smaller.
There is no "Standard" choke. A5's could be purchased with one of many different chokes, however, the more common chokes on a 28" barrel were Full and Modified