That's a reflex angle. 0 to <90 Acute angle 90 Right angle >90 to <180 Obtuse angle 180 Straight angle >180 to <360 Reflex angle 360 called Full circle
First, if the angle is 360° or more, find the remainder of the angle divided by 360 - this is as 360° represents a full turn. If you have a 360° protractor just measure off the angle. If you only have a 180° protractor, then there are two ways it can be done as the protractor is marked so that 0° - 180° can be measured from either end of the base line: Method 1: excess over 180° 1) Subtract 180° from the angle to get the excess over 180°. 2) Place the protractor on the line, centred on the vertex of the angle on the left of the line, with the top 0°/180° mark on the line. 3) Measure the excess over 180° calculated in step 1 from the bottom 0° mark of the protractor. 4) Draw in the second angle arm - the reflex angle (measured clockwise) is as required. Method 2: acute/obtuse angle of the reflex angle to complete a full turn 1) Subtract the angle from 360° to get the angle which completes the full turn 2)Place the protractor on the line, centred on the angle vertex on the left of the line, with the top 0°/180° mark on the line. 3) Measure the angle to complete the full turn calculated in step 1 from the top 0° mark of the protractor (on the line). 4) Draw in the second angle arm - the reflex angle (measured clockwise) is as required. The above assume a clockwise angle is being drawn from a vertical line with the angle vertex at the bottom. For anticlockwise angles, place the protractor on the right of the line. For a non-vertical line [mentally] rotate the paper so that the first arm of the angle is vertical with the angle vertex at the bottom.
The answer is 3rd quadrant because 980 degree -720 degree =260 degrees so the 3rd quadrant is 180 degrees to 270 degrees
An obtuse angle.
An angle of 213 degrees is a reflex angle
180-31=149 149 degree angle
reflex angle
An obtuse angle
An obtuse angle
90 < angle < 180
put the protractor on the vertex and look up at the degree's and look belowacute angle =has a measure between 0 degree's and 90 degree'sright angle =has a measure of 90 degree'sobtuse angle = has a measure between 90 degree's and 180 degree'sstraight angle = has a measure of 180 degree'sthat's how you use a protractor to measure angles.
Obtuse.
180 - 101 = 79 degrees.
It is: 180-82 = 98 degrees
The supplemental angle to an angle measure 132° is an angle measuring 114°. The supplement of an angle is another angle whose measure, when added to the original angle, will result in a measure of 180°. Given an angle that is 132°, we can find the supplement's measure by subtracting this angle from 180°. 180° - 132° = 114°
74o (180 - 106)
pi*71/180 radians