the reason the throttle would be sticking on your focus is that it (the actual unit) could be dirty. or the throttle cable could have dirt in its casing. what you need too do is remove the throttle cable and spray engine degreaser in the casing and hang it up too let the dirt and grime drip from it. be sure to use wd-40 to relubricate the cable. now as of the throttle body do the same thing. but use a non abrasive cloth and wipe the unit clean. make sure there is no dirt in any small cracks or crevises.
The throttle on your 2000 Ford Focus may be sticking due to a buildup of dirt, debris, or carbon deposits within the throttle body. It could also be caused by a faulty throttle position sensor or a damaged throttle cable. Regular cleaning and maintenance of the throttle body can help prevent sticking issues.
The 2000 Ford Focus is a compact car known for its practicality and fuel efficiency. It offers a comfortable ride with good handling, making it a popular choice for daily commuting. Keep in mind that older models may require more frequent maintenance due to wear and tear.
The value of 2000 pennies made in the year 2000 would be $20.00. This is because 1 penny is equal to $0.01.
There would be 666.66666666666666666666666666667 feet in 2000 yards, as I simply divided 2000 by 3, as there are 3 feet in one yard.
2000 / 20 = 100 of them .
Yes, there are 2000 ml in two quarts. One quart is equal to 1000 ml, so two quarts would be 2000 ml.
I can tell you with relative certainty that the condition and/or operation of the spark plugs should have nothing to do with a sticking throttle. Your best bet would be to check your throttle body for buildup or debris. Also you might check the throttle return spring on the side of the throttle body.
Clean the throttle body
could be: sticking throttle linkage, idle air control malfunction, or in emission system.
Either the throttle plate is sticking or the idle air control is not responding to ecm signal.
You can find the diagram of the throttle body on a 2000 Ford Focus with 2.0 SPI at various auto part stores. You can also check in the owner's manual.
The TPS (throttle position sensor) would be found on the throttle body on the opposite side of the throttle cable.
adjust your idle screw at your throttle body and check your cold idle stage stitch at the end of your accelerator cable at your throttle body. it may also need adjusting
AnswerBehind and Below the Carburetor there is a Set Screw that you turn in which raises the Throttle cable Bracket. Similar to this imagehttp://www.danhardison.com/focus/sc/DSC03878.JPG
faulty throttle position sensor?
The throttle position sensor on a 2000 Cavalier 2.4 is on the throttle body. It is mounted on the right side of the body.
"How do you clean the throttle body on a 2000 Pontiac Gran Prix?"
It is located on the throttle body, opposite of where the throttle cables hook on.