answersLogoWhite

0

If you are using the crucible for any type of gravimetric analysis (observing changes in mass upon the heating of a compound), then before you add your sample you need to bake the crucible in order to drive off any adsorbed materials---namely water. If you do not do this, then the initial mass of your compound will be artificially high, and so when all that adsorbed stuff is baked off, your change in mass will be high.

User Avatar

Wiki User

8y ago

What else can I help you with?

Continue Learning about Natural Sciences

What glasswear do you use to heat a solid?

a crucible and cover


What items is used to distribute heat from a Bunsen burner when heating the bottom of a crucible?

A crucible is placed in a pipestem triangle placed on an iron ring while being heated. This supports the crucible while allowing the bottom of the crucible to be directly exposed to the flame of the Bunsen burner. There is no item that is used to distribute heat from a Bunsen burner when heating the bottom of a crucible. The bottom of the crucible is intended to be exposed to the direct flame of the Bunsen burner.


What is a crucible dish?

A crucible dish is a container used in chemistry laboratories to heat and melt materials at high temperatures. It is typically made of a material that can withstand extreme heat, such as porcelain, alumina, or platinum. Crucible dishes come in various sizes and shapes to accommodate different types of experiments.


What is the use of a Laboratory Wire Triangle?

Hard to say without seeing it. It sounds like a wire frame to hold a crucible over a Bunsen (common in schools and colleges, but rarely used in most laboratories). These are usually placed over a scaffold (often a metal tripod) that is general-purpose and so too large to hold the crucible on its own.


How do you clean microfiber?

To clean microfiber, first check the care label for specific instructions. Typically, you can vacuum or brush away dust and debris, then spot clean with a mixture of mild soap and warm water. Avoid using heat or harsh chemicals as they can damage the fabric.

Related Questions

Why cool the crucible before weighing?

The crucible must be cold before weighing because the heat from the crucible will warms the surrounding air


A porcelain container used to heat things up in?

It is called a Crucible


Why should you use tongs and not fingers to handle cooled crucible and lid?

Tongs should be used to handle a cooled crucible and lid to prevent burns or injury from residual heat. Fingers are not insulated against heat like tongs are, and using them to handle a hot crucible can result in burns. Tongs provide a safe and secure grip on the crucible and allow for better control when moving it.


What glasswear do you use to heat a solid?

a crucible and cover


Why is it required to cool down a crucible before weighting it?

Cooling down the crucible before weighing it helps prevent thermal expansion or contraction that could affect the accuracy of the measurement. Weighing a hot crucible could also cause the balance to give an incorrect reading due to the heat affecting the mechanics of the instrument. Cooling down the crucible ensures a more accurate and reliable measurement.


Why must the crucible be cooled before weighing?

There are a few reasons: Safety, so individual does not get burned; a hot crucible could damage the scale; hot crucible could alter the substance being weighed; a hot crucible as the heat is released into surrounding air, it causes convection air currents when using an electronic scale than measures to multiple decimal places can give a miss reading and give the individual a larger error percentage in their experiment.


Why should you heat an uncovered crucible in a chemistry lab experiment?

Heating an uncovered crucible allows moisture to escape and prevents any pressure buildup inside the crucible, which could result in an explosion. It also ensures that any volatile substances can evaporate before the main heating begins, preventing any sudden release of gases.


What are the safety tips for using a crucible?

Use heat-resistant gloves, goggles, and a lab coat to protect yourself from heat and splashes. Handle the crucible with tongs when hot and place it on a heat-resistant surface to cool. Avoid sudden temperature changes to prevent cracking, and always use a lid to prevent splattering of molten material.


What is the right way to clean retainers?

I clean my retainer with my toothbrush and Listerine. There are tablets you can buy that you put in water and they dissolve and clean the retainers. Just whatever you do, DO NOT use any kind of heat to clean them! Using heat can misshapen your retainers!


What is a good sentence for crucible?

After the crucible absorbed the direct heat it alowed the mixture to cook evenly.


Why are the empty crucible and cover fired to red heat?

Firing the empty crucible and cover to red heat removes any moisture and contaminants that may be present on the surfaces. This helps ensure a clean and consistent environment for subsequent experiments or material processing.


What items is used to distribute heat from a Bunsen burner when heating the bottom of a crucible?

A crucible is placed in a pipestem triangle placed on an iron ring while being heated. This supports the crucible while allowing the bottom of the crucible to be directly exposed to the flame of the Bunsen burner. There is no item that is used to distribute heat from a Bunsen burner when heating the bottom of a crucible. The bottom of the crucible is intended to be exposed to the direct flame of the Bunsen burner.