0
What else can I help you with?
Is brown live and blue neutral?
yes,because its a primary color
WHAT DO NEUTRAL WIRES LOOK LIKE?
In the UK, the colours were once black = neutral, red = live, and green = earth. The modern standard colours are now blue = neutral (note the l in blue for left contact in the three pin plug used in the UK), brown = live (note the r in brown for right contact), and green and yellow stripes = earth In the US, black= hot wire, white= neutral, green or bare= ground (or earth) red= a second hot wire
What are the names of the three wires in a plug?
The three wires in a plug are typically called live, neutral, and earth wires. The live wire carries the current to the appliance, the neutral wire completes the circuit and carries the current back, and the earth wire is a safety feature to prevent electric shocks.
What is the blue wire for in a three pin plug?
The blue wire in a three-pin plug is typically the neutral wire. It completes the circuit, allowing the electrical current to return to the power source safely.
What position would you find live electrical wire?
You would find a live electric wire, with a neutral and usually also an earth wire, in any place where electricity is used. The wires are colour coded differently in different areas but in Europe live is brown, neutral is blue and earth is green/yellow.
What are blue brown and yellow wires?
Blue - Neutral Brown - Life Yellow/Green - Earth
What are the three wires in a plug called?
The green and yellow is the earth wire The brown is the live wire The blue is the neutral wire A poem to help is: The brown live cow drinks from the blue neutral water and eats the green grass from earth
Which is a ground blue or brown?
neither the blue or the brown is ground.... typically the ground is either green or green with a yellow stripe... brown is the hot wire and goes onto the brass screw in the connector...blue goes on the silver colored screw ...and green goes to ground
Is brown live and blue neutral?
yes,because its a primary color
What the colors wires are for?
Europe follows the IEC colour code that was adopted also by the UK in 2004: Single-phase: Earth: yellow and green, Neutral: blue, Live: brown. Three-phase: Earth: yellow and green, Neutral: blue, Live: brown, black, grey. In some cables the Earth wire is bare copper which should be fitted with yellow and green sleeving at its terminations.
What is the color combination of the blue, yellow, and brown wires in the electrical circuit?
The color combination of the blue, yellow, and brown wires in an electrical circuit is typically used for specific purposes, such as blue for neutral, yellow for earth/ground, and brown for live/hot.
What are the different colors of wire, including brown, blue, and green, used for in electrical installations?
Brown wires are typically used for live or hot wires, blue wires are used for neutral wires, and green wires are used for grounding in electrical installations.
What wires go brown and blue from old fashion red black wiring?
red - brown black - blue green/yellow - green
What is the Israeli wire color code?
In an Israeli single phase system the hot wire (live) is brown, the neutral (0V) is blue and the ground is green with a yellow tracer. In older installations the hot is red and the neutral is black. However occasionally these colors aren't exact. For example you may see brown and black wires. In this case the brown is the hot. You should always verify the wiring especially if the standard colors (blue, brown, and green with a yellow stripe) are not present.
What's the different between white and green wires?
white wires are neutral. green wires are ground wires.
WHAT DO NEUTRAL WIRES LOOK LIKE?
In the UK, the colours were once black = neutral, red = live, and green = earth. The modern standard colours are now blue = neutral (note the l in blue for left contact in the three pin plug used in the UK), brown = live (note the r in brown for right contact), and green and yellow stripes = earth In the US, black= hot wire, white= neutral, green or bare= ground (or earth) red= a second hot wire
What are the names of the three wires in a plug?
The three wires in a plug are typically called live, neutral, and earth wires. The live wire carries the current to the appliance, the neutral wire completes the circuit and carries the current back, and the earth wire is a safety feature to prevent electric shocks.
