answersLogoWhite

0

The wheel bearings for the Mercury Topaz are found on each axle. The average cost for a set of bearings is about 70 dollars.

User Avatar

Wiki User

10y ago

What else can I help you with?

Continue Learning about Natural Sciences

How many gallons does the tank of a 1991 mercury topaz hold?

The 1991 Mercury Topaz has a fuel tank capacity of around 13.5 gallons.


Do all 1990 Mercury Topaz have front wheel drive?

YES Some were all wheel drive. Allthough both front & rear are limited slip, & the rear only if the front wheels are spinning.


Can you do a front right wheel bearing on 91 topaz myself without any special tools?

there are no front wheel bearings in front wheel drive cars To correctly answer your question yes, there are front wheel bearings--in fact I am going to have to have mine replaced. In the Mercury Topaz book from Haynes they do not reccommend that you do them yourself. I'm thinking that a special press is used for it. Puglet


How long will it take to change the wheel bearings on a Mercury Capri?

In theory the front wheel bearings require 3 hours to replace, all going well this would be about right but I had serious trouble removing the one of the axel nuts- very tight. The job requires speical pullers to remove the bearings but with them and limited mechanical skill I was able to do it


Head light switch 93 topaz?

The headlight switch on a 1993 Mercury Topaz is typically located on the dashboard to the left of the steering wheel. It allows you to turn the headlights on and off, as well as control other exterior lights such as the parking lights and fog lights. If you are experiencing issues with your headlights, it is recommended to check the fuse, bulbs, and wiring before replacing the headlight switch.

Related Questions

What is the cost of changing wheel bearings on a Mercury Mountaineer?

wheel bearings mountaineer 2004


Can you put grease in the wheel bearings of a 1989 Topaz?

You must remove the wheel bearings, inspect them, repack them with grease, and install them back in the vehicle.


Can the rear wheel bearings on a 1990 Mercury Topaz AWB be replaced without replacing the entire hub set?

Yes. You should also replace the race at the same time.


How do you replace front wheel bearings on 07 mercury mariner?

mercury mariner


What is the fuel capcityof a 1989 mercury topaz?

According to my Chilton's Auto Repair Manual : For a 1989 Mercury Topaz ( front wheel drive ) ( 15.9 US. gallons )


How many gallons does a 1991 mercury topaz hold?

According to my Chilton's Auto Repair Manual : For a 1991 Mercury Topaz ( front wheel drive ) ( 15.9 US. gallons )


How many gallons does the tank of a 1991 mercury topaz hold?

The 1991 Mercury Topaz has a fuel tank capacity of around 13.5 gallons.


Do all 1990 Mercury Topaz have front wheel drive?

YES Some were all wheel drive. Allthough both front & rear are limited slip, & the rear only if the front wheels are spinning.


How do you change wheel barrings on a mercury villager?

The front wheel bearings need to be pressed into the spindles. This is something an automotive machine shop would normally do. The rear wheel bearings are bolt-on hub assemblies.


How do you change the front wheel bearings on a 1988 Topaz?

They are pressed in and need to be either pressed out and in on the vehicle or remove the spindle and brought to a press to do this.


How many front wheel bearings does a 1985 V6 throttlebody mercury cougar have?

2 front wheels 4 front wheel bearings 2 inner and 2 outer


Can you do a front right wheel bearing on 91 topaz myself without any special tools?

there are no front wheel bearings in front wheel drive cars To correctly answer your question yes, there are front wheel bearings--in fact I am going to have to have mine replaced. In the Mercury Topaz book from Haynes they do not reccommend that you do them yourself. I'm thinking that a special press is used for it. Puglet