You will want to use a medium base WHITE mud for laying your tile. The medium base will allow you to make adjustments to level the tile and you must use white to prevent the mud from staining the tile. Keep in mind this is a natural stone. As far as the grout goes, I recommend using 3/16 to 1/8 spacers and make sure you use a sandless grout. A grout that has sand in it will scratch your tile when you float it in. Again, this is a natural stone. Do not forget to seal your tile immediately after installation and continue to do so as needed. Also, make sure you regularly clean your tile. If you spill anything clean it up immediately and do not use anything acidic as it will stain or discolor your tile. Other than that, you will enjoy your travertine for many, many years. Good Luck.
Wiki User
∙ 16y agoFor travertine, it is recommended to use a polymer-modified thin-set mortar for installation to ensure a strong bond. When it comes to grout, sanded grout is generally used for travertine tiles with larger grout joints, while unsanded grout is suitable for smaller joints. It's important to check the manufacturer's recommendations for specific products that are compatible with travertine.
Yes, type S mortar typically requires lime to improve workability, strength, and durability. Lime also helps reduce shrinkage and cracking in the mortar mix.
Yes, you can install travertine tiles on a mobile home if the structure is stable and can support the weight of the tiles. Make sure to properly prepare the surface and use appropriate adhesive and grout for mobile home installations to account for potential movement and settling. It's also important to consider the overall weight of the tiles to avoid overloading the structure. Consulting with a professional installer is recommended for a successful installation.
No, Type S mortar cannot be used without sand. Sand is a key ingredient in mortar mix as it helps provide the bulk and strength necessary for proper adhesion and workability. Omitting sand would result in a weak and unworkable mortar mix.
People use various mixtures when building houses, such as concrete for foundations and walls, mortar for laying bricks and stones, and grout for filling gaps between tiles. Additionally, materials like paint, plaster, and joint compound are used for finishing surfaces.
To polish travertine floors, start by cleaning the surface thoroughly to remove any dirt and debris. Use a polishing compound specifically designed for travertine and apply it with a polishing machine. Work in small sections, allowing the polish to dry before buffing with a clean, dry cloth to achieve a shiny finish.
On antiqued finished the minimum is 1/8" grout line. On the honed you might be able to get a 1/16" grout line depending on the edging.
You can but it wont look very nice, if you use grout you get a smoother joint and you have lots of color choises.
if your grout line is less than 1/4" you use smooth grout, above that you use sanded grout.
You can use two different types of grout for bathroom showers. If your tile requires a thin line of grout then it would be best to use a non-sanding type and for tile that requires a wider line of grout its best to use a sanding type.
One would normally use a tile grout mixed with bonding liquid, this should not be a problem
Sadly, if you are looking to fix the tile with the grout, there is none. If you are looking for something that will not crack because of movement, a high end epoxy grout.
Use for non-load application. Mix with sand to produce a mortar for bricks and blocks. Mix proportions by weight for TYPE N Mortar - 10 kg Masonry Cement - 35 kg Sand
Use grout as silicone will start harboring algae and be almost impossible to keep looking good.
You should use the grout that will work best for the biggest grout space that you need. So for a grout width like you described, 1/16 to 1/2, you should use sanded grout. Unsanded grout will look terrible in a 1/2" grout joint, but sanded grout will look great in both. Use sanded.
No, Type S mortar cannot be used without sand. Sand is a key ingredient in mortar mix as it helps provide the bulk and strength necessary for proper adhesion and workability. Omitting sand would result in a weak and unworkable mortar mix.
Not JUST a grout no. You can get a cement that will also work as a grout but a pure grout would not have the adhesion required to stick the tiles to the wall properly, you should not use it as a cement.
The most effective products you can use to clean your travertine kitchen countertops is Travertine. You can find more info at www.findstone.com/curetrav.htm The best way to clean natural stone is with products that are designed for them. For more information on cleaning Travertine visit http://www.ehow.com/how_2087792_clean-travertine.html.