The symbol for a hot wire in electrical diagrams is typically represented by a straight line.
In the visible spectrum or the infrared? Either way, if your earth wire is glowing you have a problem. Your earth wire is not intended as a current carrying wire. If the wire is loaded to the point that it glows then your circuit/breaker is not wired correctly and the earth wire is being used as an unintended path and is a hazard. Earth wires are not sized properly to carry current.
it is the earth wire
The outer core of the earth hasn't a chemical symbol.
It seems like there may be a wiring issue causing a short circuit when the earth wire from the light is connected to the ceiling's earth wire. This could be due to a faulty connection or ground fault in the light fitting. It is best to consult a licensed electrician to properly diagnose and fix the issue to ensure safety and compliance with electrical regulations.
The symbol for Encore Wire Corporation in NASDAQ is: WIRE.
The symbol for a hot wire in electrical diagrams is typically represented by a straight line.
The symbol for Houston Wire & Cable Company in NASDAQ is: HWCC.
A 6 mm earth wire can be used to replace a 2.5 mm earth wire, but if there is an existing 6 mm earth wire it must be 6 mm all the way to the earth, and not replaced by a smaller wire between it and the earth connection.
Foe a copper wire the symbol is Cu.
It is the earth wire
The symbol for a wire is simply a line between circuit elements. The symbol for a resistor is a squiggly line. The related link goes directly to a picture of the symbol.
The symbol for Asia Pacific Wire & Cable Corporation Limited in NASDAQ is: APWC.
The inductor symbol resembles a coil of wire of 3 to 5 turns.
Earth wire
The symbol for Earth in AdventureQuest is a green circular icon with a white tree symbol in the middle.
In the visible spectrum or the infrared? Either way, if your earth wire is glowing you have a problem. Your earth wire is not intended as a current carrying wire. If the wire is loaded to the point that it glows then your circuit/breaker is not wired correctly and the earth wire is being used as an unintended path and is a hazard. Earth wires are not sized properly to carry current.