0
The pressure of liquid acting on a container or other body increases at the rate of 1 atmosphere or about 14.7 lbs. per square inch for every increase of 33 feet in depth. So doing the math results in: 400ft./33ft. = 12.121. Multiplying that by 14.7 lbs. per square inch yields about 178 lbs. per square inch at 400 feet deep.
The pressure at 400 feet below sea level would be approximately 173.5 psi (pounds per square inch). This is because for every 33 feet of depth in seawater, the pressure increases by 1 atm or 14.7 psi.
Add your answer:
Earn +20 pts
What is 1500 feet of water converted to psi?
To convert feet of water to psi, use the formula: 1 foot of water = 0.433 psi. Therefore, 1500 feet of water is equal to 650.03 psi.
What is air pressure psi at dead sea level?
The atmospheric pressure at the level of the Dead Sea is approximately 15.47 PSI.
What is the total amount pressure being fed into your engine at sea level if your turbocharger had a boost of 8 psi?
The total pressure at sea level is approximately 14.7 psi (standard atmospheric pressure). With a boost of 8 psi from the turbocharger, the total pressure being fed into the engine would be 22.7 psi (14.7 psi + 8 psi).
What is the absolute pressure at sea level under standard conditions in psi?
Atmospheric pressure at sea level is 14.7 pounds per square inch.Psia(pounds per square inch absolute) is also 14.7 pounds per square inch.However psia starts with zero pounds per square inch at 29.92 in Hg which is a vacuum measurement (absolute vacuum) in inches of mercury or in Hg.14.7 psi atmospheric pressure is as high as atmosphere pressure will ever reach. all measurements below that is a vacuum. That is where psia come in. It can start measurements in a vacuum and continue with the same unit of measurement after it comes out of the vacuum at 14.7 psi.
What is the pressure difference between earth sea level and outer space?
The pressure at sea level on Earth is about 14.7 pounds per square inch (psi), while the pressure in outer space is close to zero psi. This means that there is a pressure difference of 14.7 psi between sea level on Earth and outer space.
What is atmosperic pressure 2000 feet below sea level?
15.78 psi
What depth is 400 psi?
The depth equivalent to 400 psi can vary depending on the fluid being measured. In general, 400 psi is equivalent to approximately 920 feet (280 meters) of seawater depth.
What is the average psi on the earths crust?
Standard atmospheric pressure at sea level is about 14.7 PSI. So, then what is the pressure at about 5,645 feet below the surface of the earth?
What is PSI at 664 feet above sea level?
14.7 PSI at sea level and decreasing one PSI per 2343 feet of altitude would be 14.41660264618 PSI at 664 feet above sea level this also has to be adjusted for temp as well
How does atmospheric pressure below sea level compare with it at sea level?
14.7 psi = sea level. 15.2 psi = 1671 ft below sea level
How deep is 400 psi?
Pressure (such as psi) is measured in force per unit area and is not directly related to depth. However, 400 psi could correspond to a certain depth if it is related to a specific fluid or material with a known density and gravitational force applied. For water, 400 psi would correspond to a depth of approximately 921 feet.
What is the pressure 106 meters below sea level?
170 psi
What is the pressure at 18 feet below the surface of water?
The pressure at 18 feet below the surface of water can be calculated using the formula P = ρgh, where P is the pressure, ρ is the density of water (1000 kg/m^3), g is the acceleration due to gravity (9.81 m/s^2), and h is the depth (18 ft converted to meters). Plugging in these values, the pressure at 18 feet below the surface of water is approximately 6.8 psi.
What is the Pressure at 1200 feet below sea level?
The pressure at 1200 feet below sea level is approximately 517.2 pounds per square inch (psi). This value is calculated using the formula: pressure = depth × density of seawater × acceleration due to gravity.
What is the psi at 1 mile below sea level?
At 1 mile below sea level, the pressure in pounds per square inch (psi) would be approximately 2,227 psi. This represents the increase in pressure due to the weight of the water column above at that depth.
Sea pressure at 600 feet?
At a depth of 600 feet in the sea, the water pressure is approximately 261 pounds per square inch (psi). This pressure increases by about 14.7 psi for every 33 feet in depth due to the weight of the water column above. At 600 feet, this pressure can have significant effects on both divers and equipment.
How many feet of water does 15 PSI represent?
15 PSI represents approximately 34.7 feet of water. This can be calculated using the formula: 1 PSI = 2.31 feet of water.
