0
Primary wire is a type of insulated copper wire used mainly for the electronic connections in automobiles and other low voltage electrical equipment.
Wiki User
∙ 11y ago
Primary wire is a type of electrical wire used primarily for automotive, marine, and industrial applications. It is designed to carry electrical current from the power source to various components in a vehicle or system. Primary wire is insulated to protect against heat, moisture, and abrasion.
Add your answer:
Earn +20 pts
What are the elements in a copper wire?
The primary element in a copper wire is copper itself, which can range from 99.9% to 99.999% pure. Copper wires are often also alloyed with other elements such as tin or silver to improve their properties like strength and conductivity. Insulation materials like PVC or nylon are also used around the copper wire to protect and insulate it.
Does the NESC have any regulations as to how many volts can be on utilities primary neutral wire?
The NESC does not specifically state a limit on the voltage present on the utility primary neutral wire. However, it does provide guidelines and safety rules for proper grounding and bonding practices to ensure safety and protection of personnel and equipment. Ultimately, the voltage on the neutral wire should be maintained within safe limits as determined by electrical codes and standards.
Is iron alloy or non alloy steel?
Iron is considerd to be an alloy steel. This is because an alloy steel is when carbon is the primary alloying element. However, wire of iron is considerd to be a non alloy.
Why can a ground wire be bare?
A ground wire can be bare because it does not carry current under normal conditions. Its primary purpose is to provide a safe path for current to flow in the event of a fault, such as a short circuit, to protect against electric shock or fires. The bare copper wire helps to maximize conductivity and reduce resistance in the ground connection.
Does a wire have to be insulated for electricity to flow?
No, overhead primary wires have no insulation on them and they carry the electricity to the consumers very well. Wires with no insulation on them just need more clearance space around them and between them to prevent the wires from short circuiting to each other or to ground.
How do wire go to the coil?
The wire connects to the coil through the primary and secondary terminals. The primary wire usually comes from a power source, while the secondary wire connects to the spark plug. This creates a magnetic field that generates the spark needed for ignition.
Does a step-up transformer have fewer turns of wire in the primary than in the secondary?
Yes, a step-up transformer has fewer turns of wire in the primary than in the secondary.
What are the primary types of wire springs?
There are three primary types of wire springs: compression springs absorb energy as they are compressed, extension springs as they are extended, and torsion springs as they are twisted.
How do you size wire for a step down transformer?
You size it by the current required by the secondary, and the primary will be smaller wire.
Primary line wire size for 4MegaVoltAmpere 69kiloVolt line?
4000000VA/69000 = 57.97 amps, say a #6 wire. #4 to be safe.
What is the xlpe for a 34.5kv?
How to compute for the size of wire in the primary side of 2500 kVA transformer 34.5kV
How does power get to coil on gm?
Primary wire comes from ignition key to hot side of coil.
Does a 64 falcon have a ballast resistor?
No, it has a primary resistance wire and if you are installing a electronic dizzy you need to bypass this.
What does p1167 code mean on 1999 Honda accord?
A system malfunction in the Primary Heated Oxygen Sensor (Primary HO2S) (Sensor 1) heater circuit.The cause can be a loose wire or a defective Primary Oxygen Sensor
Why is wire good for making sculptures?
Wire is used to create a frame, or skeleton, which holds the medium (clay usually) in place. Wire could also be used as the primary medium for a sculpture. Wire is pliable and easy to shape and hold that shape while other mediums are applied.
How do you compute for the size of wire in primary side of transformer 34.5kv?
There is insufficient information in the question to properly answer it. While you specified the primary voltage, 34.5 Kv, you did not specify the current or the KVa. Please restate the question.
Which component normally included in a laser printer's toner cartridge?
Photo Sensitive Drum, cleaning blade, and primary corona wire
