If you connect a negative battery terminal to another negative terminal, you would be creating a short circuit, which can lead to excessive current flow and potential damage to the battery or the connected devices. It is not a recommended practice and can be dangerous.
Positive refers to the side of a circuit where the electrons are deficient, causing conventional current to flow from positive to negative. Negative is the side where the electrons are in excess, attracting the current flow. Neutral typically refers to a reference point in the circuit, often the midpoint between positive and negative terminals, used for grounding or voltage measurements.
When the switch is closed in a simple circuit, the negative charges (electrons) flow from the negative terminal of the battery through the circuit and back to the positive terminal. This flow of electrons creates an electric current that powers the circuit components.
There is a 50% that offspring will be Rh negative.
The cloud's strong negative charge attracts the ground's positive charge
Nothing as long as you did not then connect the other cable.
What happens when you inadvertently crossed the positive battery terminal from a negative to a positive and a positive to a negative.?Read more: What_happens_when_you_inadvertanly_crossed_the_positive_battery_terminal_from_a_negative_to_a_positive_and_a_positive_to_a_negative.
If you connect positive to positive and negative to negative you will have a 9V battery with twice the current capacity in milliampere hrs than a single batteries. The load then goes between positive and negative paralleled terminals. If you connect one negative of one battery to one positive of the other battery and put the load between the remaining negative and positive terminals you have created an 18 V battery with the same milliampere hr rating as a single battery. If you connect one negative to positive of other battery and the negative of that battery to the positive of the first battery then both batteries with quickly drain and get hot in the process. Contrary to folklore or urban lefends, they do not explode.
your battery will make a big spark or your battery could blow up.
Voltmeter will give you opposite readings or will not work at all.
Nothing happens to the vehicle if you connect the negative side first.But is is safer to connect the positive side first. Reason If the negative side is already connected and you put the positive side on you take a chance of touching a part of the body or radiator with your wrench while tightening it, causing the positive side to ground out. If your negative side is not connected yet and you touch the wrench to the body while tighting the positive side nothing will happen. So installing the positive side first reduces the chance of shorting the battery out which could cause the battery to explode.
Very Dangerous........it would be a dead short. andcouldcause a fire or explosion.
If you connect a negative battery terminal to another negative terminal, you would be creating a short circuit, which can lead to excessive current flow and potential damage to the battery or the connected devices. It is not a recommended practice and can be dangerous.
Nothing happens at all, unless there is a complete conducting path back to the battery's positive side. Once you have that, current will flow, and the light bulb may light up.
current flows from the negative to the positive cable and back into the battery cells, recombining with the element depleted of electrons that are flowing out the negative cable. The process is not 100% efficient and the battery will eventually cease producing current.
You will get a spark and maybe a shock. If you do this with a car battery, it may well explode and might cause injury.
If you connect the terminals together with them unhooked from the battery and the engine off, yes that is also called a capacitive discharge.If you connect the terminals together with them unhooked from the battery and the engine off, yes that is also called a capacitive discharge.