0
Heat is created. Without the proper protection of over current devices on the circuit this heat can reach temperatures high enough to melt the insulation on the wire. High voltage on a very small wire will vaporize it and all that will be left is copper particles.
When too much current flows through a wire, it can cause the wire to overheat, potentially leading to melting insulation, short circuits, and even fires. Excessive current can also damage the components connected to the wire and pose a safety hazard. It is important to ensure that the wire is properly sized for the amount of current it will carry to prevent these issues.
Add your answer:
Earn +20 pts
What is it called when too much current flows through a conductor?
When too much current flows through a conductor, it is called an overload. This can lead to overheating and may damage the conductor or the connected equipment if not addressed.
If no current flows through a load how much energy does it receive?
If no current flows through a load, then no energy is received by the load. Energy is transferred through the flow of current, so without any current, there is no energy transfer to the load.
What is a hypothesis stating how a fuse is used to prevent too much electric current from flowing through a circuit?
This would not be a hypothesis, but an explanation. A fuse is a piece of wire with a low melting point which melts if too much current flows in the circuit. It is designed to break before the rest of the circuit is damaged.
How much current flows in a 75-walt's light-bulb connected to a 110 voltage wall outlet?
The current flowing through the 75-watt light bulb connected to a 110-volt wall outlet can be calculated by using the formula: Power = Voltage x Current. Therefore, the current flowing through the light bulb would be approximately 0.68 amps.
Does more current pass through a thick wire than through a thin wire?
Yes, more current will typically pass through a thick wire compared to a thin wire because the thicker wire offers lower resistance to the flow of electricity. This lower resistance allows more electrons to flow through the wire more easily, resulting in a higher current.
When too much current flows through a condutor it is called a?
electric current
What device used to open a circuit if too much current flows through it?
A circuit breaker is a device used to open a circuit if too much current flows through it.
How much current flows through a resistor with zero potential difference?
No current flows when the the voltage is zero.
What is it called when too much current flows through a conductor?
When too much current flows through a conductor, it is called an overload. This can lead to overheating and may damage the conductor or the connected equipment if not addressed.
If no current flows through a load how much energy does it receive?
If no current flows through a load, then no energy is received by the load. Energy is transferred through the flow of current, so without any current, there is no energy transfer to the load.
What is it when too much current flows through a conductor?
Overcurrent, sometimes called shortcircuit.
When lightbulbs are connected in a series how much current flows through each one?
same current flow in each bulb
What is an electricity shock and what happens?
An electric shock happens when an electric current flows through the body. It causes muscular spasm and associated pain. The severity of the shock depends on how much current there is. Currents above about 35 mA can be fatal if they reach the most sensitive muscles like the heart.
How much current flows through a circuit if 2 coulombs of charge flows each second?
Current in amperes is coulombs per second, so 2 coulombs per second is 2 amperes.
When too much current flows through a wire it can cause?
the wire will burn red hot or desinigrate instantly
How much current flows through a circuit if the resitance is 4 ohms and there is a12 volt battery?
3 Ampere
What is a hypothesis stating how a fuse is used to prevent too much electric current from flowing through a circuit?
This would not be a hypothesis, but an explanation. A fuse is a piece of wire with a low melting point which melts if too much current flows in the circuit. It is designed to break before the rest of the circuit is damaged.
