One of the side effects of having too much algaecide in a swimming pool includes the likelihood of nose and eye irritations after prolonged swimming. Dry skin is also common after someone has been swimming the whole day and did not lotion up.
Most pool owners carry chlorine muriatic acid and algaecide. The wisest thing to do however is to take a water sample from about an arms length down in the pool in a cleaned bottle to a pool shop where they can test the water and let you know exactly what you need.
If the pink-purple algae keeps returning after shock treatments and algaecide, it may be resistant to those chemicals. To eradicate the algae, you may need to try a different type of algaecide specially formulated for pink algae, scrub the affected areas, and ensure proper circulation and filtration in the pool. Additionally, ensuring that the pool water is balanced and properly sanitized can help prevent the algae from returning.
Copper triethanolamine pool algaecide should not be used on concrete surfaces as it can cause staining. Instead, consider using a bleach solution (1 part bleach to 4 parts water) to clean algae and mold on concrete patios. Always test on a small, inconspicuous area first to ensure it does not cause any damage.
Black algae is very hard to get rid of You need to get down there with something an scrub the surface of the algae. this will damage it so that algaecides will be able to penetrate it Hit the pool with a suitable algaecide you will be able to get this at your pool shop and also try putting some dry chlorine in a sock and place it directly on the worst affected areas, leave it for a while and see what happens.
Extend filter run time to 24/7 and re read the instructions on the products that have been added to the pool. k Extend filter run time to 24/7 and re read the instructions on the products that have been added to the pool. k
It will take from days to weeks to have that much algaecide displaced. You should not use the pool during that time. NEXT TIME READ THE INSTRUCTIONS ON THE PRODUCTS THAT YOU USE BEFORE YOU USE IT. I would also watch out for any side effects from the copious amounts of algaecide used.
I suggest you contact the manufacturer of the algaecide and find out from them what would be the bes coarse of action.
By killing the green algae with an algaecide available at your pool shop.
Adding algaecide to the pool when the filter is on should not do any harm in fact it should mix it into the water more quickly
It is not necessary to use algaecide when you have an ionizer because the ionizer system helps prevent algae growth in the pool water. Using both algaecide and an ionizer can lead to over treatment and potential adverse effects on water quality. Always follow the manufacturer's instructions for your specific pool system.
my pool did get milky but cleared up after 48 hours
You want to have the equipment running while adding any chemicals. You will want to wait about an hour after adding algaecide.
Vaccum the algaecide and its treated remainder to WASTE. Keep testing until it is ok. It should be fine. You may also call the company who makes the algaecide to get their suggestions. When I had a problem with my pool about three weeks ago, the pool company put a LOT of algaecide in the pool and then I vaccumed it to waste. Now I put just the minimum in each week to prevent algae from growing.
Excess algaecide in a swimming pool can be harmful if ingested or if it comes into contact with skin, eyes, or mucous membranes. It is important to follow the manufacturer's instructions for adding algaecide to ensure that the water remains safe for swimming. If you suspect the algaecide levels are too high, it's best to consult a professional pool technician for guidance on how to correct the imbalance.
add a poly 60 or a 7% copper based algaecide if you dont have a heater on the pool.
the same as before. whoever told you that you didnt have to shock and use algaecide lied. the same as before. whoever told you that you didnt have to shock and use algaecide lied.
Yes. They have different types of Algaecide, you want to use one that is recommended for pool openings. Add the proper amount of chemicals (most bottles/packages have a chart with how much to add) and brush your pool. Fish out any leaves and when you can start to see the bottom start the vaccum. Any pool chemical website has this information.