0
The GFCI has tripped off that controls my bedroom lights and garage outlets and i cant get it to reset why?
There is three possible reasons for this. First, check to make sure that the breaker also did not trip, a GFCI outlet will not reset if not powered. Second, if the load that caused the GFCI to trip is still plugged in it will not allow the GFCI to reset. So, before trying to reset the GFCI unplug everything that it protects. Third, you might just have a bad GFCI, attempt the above suggestions first and if it still will not reset you will need to replace the GFCI. If after all this the you are still having problems then something more serious is wrong and you need an on site electrician to diagnose the problem.
Still curious? Ask our experts.
Chat with our AI personalities
Blake
Ezra
MaxineFirst, make sure to unplug any devices from the affected outlets. Then, try pressing the reset button firmly until it clicks. If it still won't reset, there may be a fault in the wiring or a malfunction in the GFCI outlet itself, and it would be best to call a licensed electrician to investigate further.
Add your answer:
Earn +20 pts
Why would 2 house outlets and the garage be without power yet no breakers are tripped and how do you fix it?
There could be a problem with a circuit connection or a faulty outlet. Check for any loose connections and inspect the outlets for any visible damage. If everything appears normal, consider calling a professional electrician to diagnose and fix the issue, as electrical work can be dangerous if not done correctly.
You have 1 outlet in the garage - 1 in your bathroom and 1 exterior outlet that all stopped working - you have checked your breakers and they seem to be ok What should you do?
First, check the GFCI outlets in these areas as they may have tripped. Resetting them could restore power to the affected outlets. If that does not work, consider calling an electrician to diagnose and fix the issue, as there may be a wiring problem that requires professional attention.
Should you use 14-2 or 12-2 for garage outlets and lights in Richfield mn?
In Richfield, MN, it is recommended to use 12-2 wiring for garage outlets and lights to ensure compliance with local electrical codes and to provide sufficient capacity to handle the electrical load in the garage. This gauge is commonly used for standard residential electrical circuits.
Do all electrical outlets in a garage need to be GFCI?
It is recommended to have GFCI protection for all electrical outlets in a garage to help reduce the risk of electric shocks. This would typically involve installing a GFCI outlet at the beginning of the circuit to protect the rest of the outlets downstream.
What might cause a loss of all electricity in your garage but not your house without a storm hitting or sudden increase of electricity usage?
A possible cause could be a tripped circuit breaker specific to the garage or a fault in the electrical wiring that serves the garage. It is important to investigate the circuit breaker panel and inspect the wiring for any visible signs of damage. If unable to identify the issue, contacting a professional electrician for further inspection and repairs is recommended.
