Wiki User
∙ 13y agoIf an appliance is plugged in but the switch is OFF, the electrician should always consider the appliance as
A. hazardous. C. safe.
B. ungrounded. D. de-energized.
Luis Riveragonzalez
Moshe Kunze
Nakia Fritsch
Joe Oberbrunner
Josefina Kunze
live or having current present.
Wiki User
∙ 13y agoLive!
No, it is not safe to plug a 380V appliance into a 415V outlet as it could cause damage to the appliance and create a safety hazard. The appliance may not be designed to handle the higher voltage and could potentially malfunction or overheat. It is important to always use the correct voltage for your appliances to avoid damage or safety risks.
If a 12 volt appliance is connected to a 120 volt outlet, it would likely get damaged due to the excessive voltage. The appliance is designed to run on 12 volts, so the higher voltage could overwhelm and fry its electrical components. It's important to always match the voltage requirements of an appliance with the electrical supply to prevent damage.
If the fuse rating is less than the current an appliance needs, the fuse will likely blow or burn out. This is because the fuse is designed to protect the appliance from overheating or catching fire by interrupting the circuit when the current exceeds the fuse rating. It is important to always use a fuse with a rating that matches the current requirements of the appliance.
If the appliance is just to be plugged into a circuit with multiple outlets then you just need to make sure that the sum of currents for all devices on the circuit are less than the rated current. A rule of thumb is total current should be no greater than 80% of the rated current. So you might have a 20 A breaker and several 2.5 A appliances on this circuit. If you have a dedicated circuit for the appliance you would only need to size the breaker for the maximum current being drawn by the appliance. If the appliance contained a motor then there might be a start-up current that might be as high as 15 amps so you would likely go to a 20 amp breaker for a safety margin. As a practical matter a dedicated circuit for an appliance in the 2.5 amp range should have a 15 amp breaker. I always install a 20 amp breaker just for added margin and possible future applications.
For a 7 amp appliance, you would typically use a 10 amp circuit breaker to provide sufficient protection. It is recommended to always use a breaker with a slightly higher rating than the appliance's current draw to prevent nuisance tripping and ensure safety.
Only waterproof shaving appliances are safe to be used in the shower, and these most always be pre-charged and not plugged in.
No, it is not safe to plug a 380V appliance into a 415V outlet as it could cause damage to the appliance and create a safety hazard. The appliance may not be designed to handle the higher voltage and could potentially malfunction or overheat. It is important to always use the correct voltage for your appliances to avoid damage or safety risks.
If a 12 volt appliance is connected to a 120 volt outlet, it would likely get damaged due to the excessive voltage. The appliance is designed to run on 12 volts, so the higher voltage could overwhelm and fry its electrical components. It's important to always match the voltage requirements of an appliance with the electrical supply to prevent damage.
An Electrician
electrician!
An Electrician
An Electrician
no, not at all i always keep mine plugged in
No,there are accoustic Basses
They did consider them dangerous but not always consider them evil.
See Discuss Question below.
If you pay attention to what you are doing and if you are a physical person, there will ALWAYS be work.