None, since there can be no direct conversion.
A square foot is a measure of area in 2-dimensional space while a kilogram is a measure of mass. The two measure different characteristics and, according to the most basic principles of dimensional analysis, any attempt at comparisons or conversions between the two are fundamentally flawed.
The density of mild steel is typically around 7850 kg/m^3.
The weights of steel rods with diameters of 8mm, 10mm, 12mm, 16mm, and 20mm will vary based on the specific material used. As an example, the weight of a 1-meter long mild steel rod with a diameter of 8mm would be approximately 0.39 kg, 0.62 kg for 10mm, 0.89 kg for 12mm, 1.58 kg for 16mm, and 2.47 kg for 20mm. These are approximate values and can vary depending on the exact composition of the steel.
up ur bum u crazy schoolboy
The density of 4037 steel is approximately 7.85 g/cm3.
The weight of a plate of steel can vary depending on the thickness of the steel. A rough estimate for mild steel would be around 0.0283 pounds per cubic inch. To calculate the weight of a 4x8 sheet of steel, you would need to know the thickness of the steel in inches. Multiplying the area of the sheet (4x8=32 square feet) by the thickness of the steel will give you the volume of the steel. Multiply the volume by the weight per cubic inch to get the total weight of the sheet.
200 kg of steel. Steel is denser than aluminum (so, more stuff to heat in 200 kg of steel than in 200 kg of aluminum), and 200 kg is twice as much as 100 kg (so, more stuff to heat in 200 kg of steel than in 100 kg.)
1000 kg
About 2.27 kg of steel bars is used for the RCC slab of size 50' 18' 4.5.
500 Ugandan wives.
35.84 kg
nearly 10 kg of manganese is required to manufacture one tonne of steel
What rupees of per kg high speed steel
8000 kg or 17636.98 lb mass
About 64 kg for a man that size
The weight of steel is typically measured in pounds (lbs) or kilograms (kg) per unit length, area, or volume. To calculate the weight of a specific amount of steel (e.g., 38 mm in length), you would need to know the density of the steel and apply the appropriate conversion factors.
You need 40 Pounds or 20 KG to cook an egg because if you have 20 KG When you have 5 Kg hand power.
250 kg