2 1in Tablets in a feeder.
608 US gallons of water is about 5,076.8 pounds.
55,000 US gallons of water weighs about 459,250 pounds.
To solve this question, we need to figure out how much chlorine should be added to 15 ounces of water to achieve a mixing ratio of 1 part chlorine to 10 parts water. So, you would need 1.5 ounces of chlorine to add to 15 ounces of water to get the correct ratio of 1 part chlorine to 10 parts water.
If too much chlorine is added Sulphurdioxide is used
1,468 US gallons is about 12,257.8 pounds.
To make 2 gallons of water with 100 ppm of chlorine bleach, you would need to add 2.11 milliliters of bleach.
To shock a pool, the general recommendation is to add 1-3 gallons of chlorine bleach (5-6% concentration) per 10,000 gallons of water. For 639 gallons, you would typically add around 0.06 to 0.19 gallons, which is approximately 8 to 24 ounces. Always check the specific instructions on the bleach label and test the water afterward to ensure proper chlorine levels.
The amount of chlorine needed for a pool depends on its size, level of usage, and current chlorine levels. A general guideline is to add 2-4 ppm of chlorine to a pool, which can typically be achieved by adding 1/2 gallon to 1 gallon of liquid chlorine per 10,000 gallons of water. It's important to test the water regularly and adjust the chlorine levels accordingly.
To sanitize 1500 gallons of water, you typically need about 1 tablet of chlorine, assuming the tablet is around 3 inches in diameter and contains approximately 3 inches of chlorine. However, the exact amount can vary based on the specific product and the water's current chlorine levels. It's best to consult the manufacturer's guidelines for precise dosing instructions.
If you have a "chlorine generator" that requires salt in the water, ALWAYS refer to the manufacturers recommendations for the proper amount.
You may need to go to a much lower setting or turn it off for a brief period.
4 cups of regular strength bleach daily per 10,000 gallons will keep the chlorine levels between 1 and 3 ppm. This pool needs 3.2L of liquid chlorine daily if stabilised or double that amount if not.
To chlorinate a 20x40 pool, you typically need about 1-3 pounds of chlorine per 10,000 gallons of water to achieve the recommended chlorine level. Assuming an average depth of 4 feet, the pool holds approximately 27,000 gallons of water. Thus, you would require about 2.7 to 8.1 pounds of liquid chlorine to reach the desired levels, depending on the current chlorine concentration and water conditions. Always test the water first and adjust accordingly.
To determine how much Clorox to add to 640 gallons of pool water, you typically need to achieve a chlorine concentration of about 1-3 ppm (parts per million). A common guideline is to add 1 gallon of Clorox (which is approximately 5.25% sodium hypochlorite) for every 10,000 gallons of water to raise the chlorine level by about 1 ppm. Therefore, for 640 gallons, you would need approximately 0.064 gallons (or about 8 ounces). Always refer to the specific product instructions for precise dosing based on your pool's needs.
50 gallons of water!
one pound of cal hypo, granule chlorine, will treat 10,000 gallons of pool water. So use 1/4 pound to shock, two or three times that if pool goes green. If pool has a vinyl liner use sodium hypochloride, liquid shock, instead of granules.
You would typically need to add around 2-3 ounces of chlorine for every 350 gallons of water in a hot tub. However, it's important to test the water regularly and adjust the chlorine levels based on the specific conditions of your hot tub.