0
What else can I help you with?
Can you connect 2 amps to run a subwoofer?
If your sub is 2 ohms and your amp is 2 ohm stable, your done. Your amp will be at 2 ohms because the sub is 2 ohms.
How many watts is a kicker impulse 352xi amp?
The Kicker Impulse 352xi amp has a maximum power output of 35 watts per channel x 2 channels at 4 ohms or 35 watts x 2 channels at 2 ohms.
How many amp passes thou 10 amp fuse?
A fuse is a safety device which is designed to blow (fuse) if a larger current than it is rated for passes through it. So a 10 amp fuse can pass anything up to 10 amps.
What colour goes to fuse in American wire?
The standard color coding for fuses in American wire is as follows: 15-amp fuse: blue 20-amp fuse: yellow 30-amp fuse: green
Can you replace a 20 amp fuse in your car with a 25 amp due to the fuse keep blowing?
Yes you can but you are setting yourself up for a big problem. There is a reason the 20 amp fuse is blowing. By installing a bigger fuse it allows the current that is causing the 20 amp fuse to blow to stay in for a longer period of time. This can cause excessive heating and melting of the wires on the circuit that is blowing on a 20 amp fuse. Trace the wire and find the fault. Always use the manufacturer's recommended fuse sizing for your own protection.
How do you measure the resistance of a 30-amp cartridge fuse in ohms?
Set a Volt-Ohm meter to Ohms and put the two leads from meter across the fuse. One on each end where the metal is located. The meter should read zero ohms if the fuse is NOT blown.
How many ohms in 100 amp fuse?
To determine the resistance in ohms of a 100 amp fuse, you can use Ohm's Law, which states that resistance (R) equals voltage (V) divided by current (I). For instance, if the fuse operates at a standard voltage of 120 volts, the resistance would be R = V/I = 120V/100A = 1.2 ohms. However, the resistance of a fuse can vary based on its design and current rating, and fuses are typically designed to have very low resistance during normal operation.
How to wire and amp down to 0.3 ohms?
You can wire and amp down to 0.3 ohms by decreasing its windings.
Can you connect 2 amps to run a subwoofer?
If your sub is 2 ohms and your amp is 2 ohm stable, your done. Your amp will be at 2 ohms because the sub is 2 ohms.
What are the correct fuses to use in the fuse box of a peugeot 205 gti 1.9 1989?
fuse number 1 is 10 amp fuse 2 is 25 amp fuse 3is 25 amp fuse 4 is a spare fuse 5 is 10 amp fuse 6 is a spare fuse 7 is 20 amp fuse 8 is 25 amp fuse 9 is 20 amp fuse 10 is 5 amp fuse 11 is 5 amp fuse 12 is a spare fuse 13 is 5 amp fuse 14 is 15 amp
What happens if you run and 8 ohm subwoofer at four ohms A bridged pa amp is cheaper than buying a large amp running 8 ohms from either side?
the sub woofer will not put the max sound out that its recommended my guess it will blow the fuse or damage the speaker. the amp well i recommend you not to text that out the hard way, but let somebody have the skills to hook them up right!
What does a 35 amp time delay fuse look like when it blows?
If you can observe the fusible link it should be open and there should be some charring on the glass. Use an Ohm meter to confirm fuse is blown. If it is zero ohms across the fuse it is not blown.
If two four ohm single voice coil subs are wired in parallel how many ohms will be on the amp?
Two four ohm speakers in parallel is two ohms. Make sure the amp is rated for that load impedance, or you could damage it.
What is the difference between a 4 amp fuse and a 5 amp fuse?
1 amp
Can you replace a 10 amp fuse with a 20 amp fuse?
NO! Using a larger amp fuse defeats the purpose of the fuse to protect the wiring in the circuit. This can cause a fire. Always use the correct amp fuse for that circuit.
Can you replace a 20 amp fuse with a 10 amp fuse?
NO! Using a larger amp fuse defeats the purpose of the fuse to protect the wiring in the circuit. This can cause a fire. Always use the correct amp fuse for that circuit.
How many ohms are in an watt?
They're are not related. Watts are measurement of power while Ohms are measurement of resistance. One watt equals one volt times one amp.
