0
What else can I help you with?
What time is it in Ozersk Russia?
WikiAnswers has no way to answer this question. You need to go to a search engine and search for time zones.
What time is it in Yuma AZ?
I'm unable to provide real-time information, but you can easily check the current time in Yuma, AZ by looking it up on a search engine or checking the time on your phone.
What time is now in Indonesia?
I'm unable to provide real-time information, but you can check the current time in Indonesia by using a world clock feature on a search engine or a time zone converter.
Why need to overhaul engine?
because the engine's mechanical parts worn out, they need to be disassembled, studied and measure and replace if possible
What is the term for the time when both the intakek and the exhaust vavles are open at the same time?
The term for the time when both the intake and exhaust valves are open simultaneously is called "valve overlap." This occurs during the end of the exhaust stroke and the beginning of the intake stroke in a four-stroke engine cycle. Valve overlap can enhance engine efficiency by allowing better exhaust scavenging and improved intake charge filling.
How do you a 4m51 engine?
how to time a 4m51 canter engine
What is the valve timing for a mitsubishi canter 4m51 engine?
The Mitsubishi Canter 4M51 engine does not have a timing belt or chain.
What is the timing specification for Mitsubishi 4M51 engine?
what is the cam timing specification for mitsubishi 4M51 engine?
What are the torque settings for the cylinder head Mitsubishi Rosa engine model 4M51?
what are the torque settings for a mitsubishi 4m51 engine
How many liters of oil for Mitsubishi canter 4m51 engine should have?
The Mitsubishi Canter 4M51 engine typically requires around 10-12 liters of oil for a complete oil change, including the oil filter. It is important to refer to the specific vehicle's owner's manual for the exact oil capacity and viscosity recommended by the manufacturer. Additionally, it is crucial to check the oil level regularly and top up as needed to ensure proper engine lubrication and performance.
How do you align the timing marks on 4m51 Mitsubishi canter?
timing on 4m 51 engine
What is the torque specs for the Mitsubishi 4m51 engine?
The torque specifications for the Mitsubishi 4M51 engine vary depending on the component being torqued. For the cylinder head bolts, a typical specification is around 70 Nm (51 lb-ft) in several stages. Always refer to the specific service manual for your engine for precise values and procedures, as variations may exist based on the application or model year.
Its a 1997 mitsubishi canter truck with a 4m51 engine?
The 1997 Mitsubishi Canter is a light-duty truck known for its reliability and versatility, often used for various commercial purposes. It features a 4M51 engine, a 4-cylinder diesel engine that provides a balance of power and fuel efficiency. This model is popular for its maneuverability in urban settings and its capability to handle diverse loads. Regular maintenance is essential to keep the engine running smoothly and to extend the truck's lifespan.
How much valve clearances for fuso 4m51 engine?
The valve clearance specifications for the Fuso 4M51 engine are typically set at 0.20 mm (0.008 in) for the intake valves and 0.25 mm (0.010 in) for the exhaust valves when the engine is cold. It's important to check the specific service manual for your vehicle, as clearances may vary slightly based on model year or specific configurations. Regular maintenance of valve clearances is essential for optimal engine performance.
Why white smoke in 4m51 Mitsubishi?
White smoke from a 4M51 Mitsubishi engine typically indicates coolant entering the combustion chamber, often due to a blown head gasket, a cracked cylinder head, or a damaged engine block. This can lead to overheating and potential engine damage if not addressed promptly. It's essential to diagnose the issue and repair it to prevent further complications. Regular maintenance and monitoring can help catch such issues early.
What are the valve clearance for Mitsubishi 4m51?
The valve clearance specifications for the Mitsubishi 4M51 engine are typically set at 0.15 mm (0.006 inches) for the intake valves and 0.20 mm (0.008 inches) for the exhaust valves. It's important to check these clearances regularly to ensure optimal engine performance and prevent potential damage. Always refer to the specific service manual for your vehicle to confirm these values, as they may vary slightly depending on the model and year.
What are the torque specs for the cylinder head and main big end bearing - Mitsubishi Canter engine model 4M51?
For the Mitsubishi Canter engine model 4M51, the torque specifications for the cylinder head bolts are typically around 100 Nm (Newton-meters) with specific tightening sequences. For the main big end bearing bolts, the torque specification is generally about 70 Nm. It's important to consult the specific service manual for your engine, as these values can vary slightly based on the model year or specific configuration. Always follow the recommended tightening sequence to ensure proper sealing and performance.
