Hold the mode button until the usa icon sectional map starts blinking then advance to your proper time zone via the up arrow.
Press the SEARCH button until the desired time zone is selected.
To set the time zone on a Sharp SPC775, press the "Menu" button, then navigate to the "Settings" or "Time" option using the arrow keys. Select "Time Zone" and choose your desired time zone from the list provided. Confirm your selection and exit the menu. If needed, refer to the user manual for specific instructions based on your model.
current time is 10:31 need to
Push the Time button once. This will change the Month/Day window to Alarm 1. Push the up button until the desired time zone is reached. Push the Time button twice more to return back to Month/Day display.
All time zones are set by Coordinated Universal Time (UTC).
To set up a Sharp Atomic Clock Model SPC 502, first, insert the batteries and ensure they are properly seated. Next, place the clock in an area with good visibility to the signal and press the "Set" button to enter the time zone setting. After selecting your time zone, the clock will automatically search for the atomic time signal; ensure it remains in a location where it can receive the signal without interference. Finally, adjust any additional settings, such as alarm or display preferences, as needed.
Press the SEARCH button until the desired time zone is selected.
To set the time zone on a Sharp SPC775, press the "Menu" button, then navigate to the "Settings" or "Time" option using the arrow keys. Select "Time Zone" and choose your desired time zone from the list provided. Confirm your selection and exit the menu. If needed, refer to the user manual for specific instructions based on your model.
To set the time zone on a Sharp SPC 1003 atomic weather station clock, first press the "SET" button to enter the setup mode. Use the "CH" button to navigate to the time zone setting, then adjust it using the "+" or "-" buttons until the desired time zone is displayed. Once set, press the "SET" button again to confirm your selection and exit the setup mode.
Try this (it works for a similar model): For the Sharp SPC374T Atomic Clock - Time Zone setting- Press the "Time" button once, the time zone will show where 'Day' usually is (e.g., "PA" for Pacific), use the Up or Down button to adjust. Press the time button once to save.
current time is 10:31 need to
Push the Time button once. This will change the Month/Day window to Alarm 1. Push the up button until the desired time zone is reached. Push the Time button twice more to return back to Month/Day display.
Try this (it works for a similar model): For the Sharp SPC374T Atomic Clock - Time Zone setting- Press the "Time" button once, the time zone will show where 'Day' usually is (e.g., "PA" for Pacific), use the Up or Down button to adjust. Press the time button once to save.
Leave it alone. The next time it gets a radio signal lock it will set itself. If it sets wrong, verify and if necessary correct the time zone.
in you settings, make sure that the time zone is set to your time zone
Push the Time button once. This will change the Month/Day window to Alarm 1. Push the up button until the desired time zone is reached. Push the Time button twice more to return back to Month/Day display.
PST