0
To convert BCMs to tonne you use a factor ranging between 2.5 and 2.8 depending on the density of the material you are moving. 40 tons is equivalent to 22 cubic metres. To get BCMs from cubic metres, you apply a factor of 70%. therefore, 40 tons is equivalent to about 15.4 BCMs giving a factor of 2.5974025974025, thus 1BCM = 2.5974025974025 tonnes.
What else can I help you with?
Please Convert 509 tons of asphalt concrete binder course to cubic meter?
To convert 509 tons of asphalt concrete binder course to cubic meters, you need to know the density of the material. The density of asphalt concrete binder course can vary, but a common value is around 2.2 tons per cubic meter. Using this value, 509 tons would be approximately 231.36 cubic meters.
How do you convert Acid in tons to gallons?
The answer will depend on the acid, which do not have the same density.
How many tons of dirt are in 27000 yards?
To convert cubic yards of dirt to tons, you need to know the density of the dirt, which typically ranges from 1.5 to 2 tons per cubic yard. Assuming an average density of 1.5 tons per cubic yard, 27,000 cubic yards of dirt would weigh approximately 40,500 tons. If using a density of 2 tons per cubic yard, it would weigh around 54,000 tons. The exact weight will depend on the specific type of dirt.
How do you convert NM3 in to metric ton?
To convert NM3 (normal cubic meters) to metric tons, you need to know the density of the gas. Once you have the density, you can multiply the volume in NM3 by the density to get the mass in metric tons. The formula is: Mass (metric ton) = Volume (NM3) x Density (metric ton/NM3).
How do you convert 10 cu.m to ton?
To convert cubic meters to tons, you need to know the density of the substance you are measuring. The conversion factor depends on the material being measured. Once you have the density, you can use the formula: weight (in tons) = volume (in cubic meters) x density (in tons per cubic meter).
How do you convert tons into gallons?
By using the density of the fluid. If it isn't a fluid, you don't!
How do you convert cubic feet of rock to tons?
How to convert cubic meters to tons of armour rock with 2.7 specific
Please Convert 509 tons of asphalt concrete binder course to cubic meter?
To convert 509 tons of asphalt concrete binder course to cubic meters, you need to know the density of the material. The density of asphalt concrete binder course can vary, but a common value is around 2.2 tons per cubic meter. Using this value, 509 tons would be approximately 231.36 cubic meters.
How do you convert Acid in tons to gallons?
The answer will depend on the acid, which do not have the same density.
How do you convert cubic mts to tons?
To convert cubic meters (m³) to tons, you need to know the density of the material you are converting, as tons measure weight while cubic meters measure volume. The formula is: tons = cubic meters × density (in tons per cubic meter). For example, if the density of the material is 2 tons/m³, then 1 m³ would equal 2 tons. Always ensure to use the correct density corresponding to the specific material for accurate conversion.
How many metric tons in a cubic meter?
The conversion factor from cubic meters to metric tons depends on the density of the substance being measured. To convert, you need to know the density of the material in question in units of metric tons per cubic meter. Then, you can multiply the density by the volume in cubic meters to determine the mass in metric tons.
How do you convert cubic meter of asphalt to tons?
To convert cubic meters of asphalt to tons, you need to know the density of the asphalt, which typically ranges from about 2,200 to 2,400 kg/m³. Multiply the volume in cubic meters by the density to get the mass in kilograms, then divide by 1,000 to convert to tons. For example, if the density is 2,300 kg/m³, then 1 cubic meter of asphalt would equal approximately 2.3 tons.
How do you convert ethanol in liters to tons?
To convert ethanol liters to tons, you need to know the density of ethanol. The density of ethanol is about 0.789 kg/L. To convert kilograms to tons, divide by 1000. So, to convert ethanol liters to tons, you would multiply the volume in liters by 0.789 (density of ethanol) and then divide the result by 1000.
How do you convert cubic meters to metric tons of fuel oil?
To convert cubic meters to metric tons of fuel oil, you need to know the density of the fuel oil in metric tons per cubic meter. Once you have the density value, you can multiply the number of cubic meters by the density to get the mass in metric tons. The formula for this conversion is: Mass (in metric tons) = Volume (in cubic meters) x Density (in metric tons per cubic meter).
How do you convert ton to cft?
To convert tons to cubic feet (cft), you need to know the density of the material in question. The formula for converting tons to cubic feet is: cubic feet = (tons / density). For example, if you have 2 tons of a material with a density of 100 pounds per cubic foot, the conversion would be: cubic feet = (2 tons / 100 lb/ft^3) = 0.02 cubic feet.
How do you convert NM3 in to metric ton?
To convert NM3 (normal cubic meters) to metric tons, you need to know the density of the gas. Once you have the density, you can multiply the volume in NM3 by the density to get the mass in metric tons. The formula is: Mass (metric ton) = Volume (NM3) x Density (metric ton/NM3).
How do you convert 10 cu.m to ton?
To convert cubic meters to tons, you need to know the density of the substance you are measuring. The conversion factor depends on the material being measured. Once you have the density, you can use the formula: weight (in tons) = volume (in cubic meters) x density (in tons per cubic meter).
