Maguires makes a product that has worked well for me over the years. They have a plastic cleaner and a plastic polish. The cleaner takes out small scratches and yellowing, and then you follow up with the polish. This sounds backwards, as to what the cleaner and the polish do, but that's the way they're labled. They come in a blue/white, and white/blue squeeze bottle. I've always purchased mine from the marine stores, but have seen them at other retail establishments. You could also use Flitz it! There are special cleaners to remove oxidatin on plastic, flitz is one, or check out the car care section of a kragen and ask them what they like. Also, PITTMAN'S Original One Step ALR is a pure liquid deoxidizer that is guranteed to remove oxidation on contact without scratching the vinyl.
You can clean oxidation off black plastic by using a mixture of equal parts water and white vinegar. Apply the solution to the affected area, scrub gently with a soft brush or cloth, and rinse with water. You can also use a commercial plastic polish or a baking soda paste to remove oxidation from black plastic surfaces.
Plastic newspaper sleeves can be reused in a number of ways. If you have a dog, these plastic sleeves can be used to clean up after them when on a walk.
A Plexus Plastic Cleaner is used for cleaning, polishing and protecting plastic surfaces. It is often used to clean motorbikes or other acrylic material items.
The best way to clean a plastic hose for a fish tank is to use pipe cleaners, depending on the width of the interior tube you may be able to use a rag as a pipe cleaner type tool and just spin the rag through the hose until it is clean.
how do open a plastic bottle of liquid Nacl 9% to clean my incision
You can clean oxidation off black plastic by using a mixture of equal parts water and white vinegar. Apply the solution to the affected area, scrub gently with a soft brush or cloth, and rinse with water. You can also use a commercial plastic polish or a baking soda paste to remove oxidation from black plastic surfaces.
wash it with cold water but do not use soap. it will ruin it.
If the car is a collector I would pay a good body manto "buff" the paint
Possible an air deflector that helps to keep the rear window clean.
If you're talking about the rear glass window on a convertible top, try using double-sided sticky tape, the kind auto parts stores sell for installing plastic side molding. It works great, just clean the area well before you apply it.
clean me
You get a bucket of water wet the squeegee and clean the window
I spray window cleaner on a soft cloth then wipe down the parts. If that doesn't do it, then I use a Mr Clean Magic Eraser.
you get windex and clean them
Yes you can, because i just did it so i could clean the window, now whether i should have done it or not is a different story.
Magic.
This will have to be sanded off. After the oxidation has been removed the strip should be sealed with a sealer.