To calculate the weight: Height x Width x Length x 2.5
Mass is: M=V x d.To calculate the mass you need to know the density of this concrete and also the volume.
A cubic yard of concrete weighs the same underwater as it does on land, which is approximately 4,000 to 4,500 pounds. The weight is determined by the density of the concrete mix, not the surrounding environment.
The weight of reinforced concrete varies depending upon the mix type. The engineering industry typically assumes a weight of 145 pounds per cubic foot (pcf) and most often uses 150 pcf for structural calculations. Note that this is for standard cured reinforced concrete. Lightweight concrete is generally taken as 110 to 120 pcf, again, depending upon the mix design. The fact that there is sometimes more or less steel reinforcement within the structural member is ignored.
No, you do not need to know the atomic weight to calculate molarity. Molarity is calculated by dividing the moles of solute by the volume of solution in liters. Knowing the atomic weight can help determine the number of moles in a given mass of solute, but it is not required to calculate molarity.
by using calculator
Calculate the cross-sectional area of the barrier in square feet, multiply the area by the density of concrete (150 pounds per cubic foot), and multiply the answer by the length of the barrier in feet.
Precast concrete is concrete that is cast and cured in a controlled factory environment using reusable molds, rather than being poured and formed on the construction site. In this process, the concrete is mixed, placed into specific molds or formwork, compacted, and allowed to cure under controlled conditions to achieve the desired strength and quality. Once the elements are hardened and ready, they are transported to the project site and assembled into the structure. Precast concrete is used to produce a wide range of components, including: Wall panels Beams and columns Floors and slabs Staircases Bridge segments Because it is manufactured off-site, precast concrete offers higher quality control, faster installation, and consistent finishes compared to traditional site-cast concrete. It is known for its durability, versatility, and efficiency, making it a popular choice in modern construction.
to answer your question, one must know the thickness of the slab? then only the weight can be calculated
To calculate the self-weight of a column, first determine the volume of the column by multiplying its cross-sectional area by its height. Then multiply the volume by the density of the material the column is made of (typically concrete or steel) to obtain the self-weight.
weight of hardened concrete + 100 kgf/m3
You need to calculate the total volume of the space that the concrete has to fill. if you're doing a slab 4" thick a cu. yd. will cover 81 sq. ft. Take the total area and divide by 81 to get the number of yard needed.
To calculate the volume of a cylinder of concrete, you can use the formula: ( V = \pi r^2 h ), where ( V ) is the volume, ( r ) is the radius of the base, and ( h ) is the height of the cylinder. Ensure that the radius and height are in the same units to obtain the volume in cubic units. If you need the weight of the concrete, multiply the volume by the density of concrete, typically around 2,400 kg/m³.
the lightweight concrete weights are depends upon their aggregates.... basically the weight of lightweight concrete is 50lb/cubic feet
Weight of concrete is 155 lbs/cft or 70.308 kg/cum
The weight of a concrete 80 lb bag is 80 pounds.
unit weight= weight/volume.unit weight of normal concrete = 24 MPaIt is also known as density of concrete
weight and length of steel bar ~6