0
What else can I help you with?
Can you use a 125V 15A fuse to replace a 250V 10A fuse?
No, it is not safe to replace a 250V 10A fuse with a 125V 15A fuse. The voltage rating of the fuse must be equal to or greater than the system voltage, and the amperage rating must be equal to or lower than the rated current of the circuit. Using a lower voltage or higher amperage fuse can lead to safety hazards, including potential fire risks.
Can you use a 250v 15 amp fuse for a 125v 15 amp?
No, it is not safe to use a 250V 15A fuse in a 125V circuit. The voltage rating of the fuse should match or exceed the circuit voltage to ensure safety. Using a lower voltage rated fuse can lead to overheating and potentially create a fire hazard. Always use the correct fuse rating for your circuit.
Calculate 120Volt 15 amp appliance kWh?
Well, a 120V appliance that draws 15A would be using 1800W. (15x120). A killowatt hour is one killowatt used continuously for an hour. If you used that device for one hour straight, it would use 1.8 kWh. (Keep in mind the device may not draw a full 15A)
Can you plug 15A 125V rated US power cord into 230V socket outlet?
No, it is not safe to plug a 125V rated power cord into a 230V socket outlet. The power cord is not designed to handle the higher voltage and could result in damage to the cord or connected devices, and pose a safety hazard. It is important to always match the voltage ratings of power cords and outlets to prevent damage and ensure safe operation.
What fuse controls wipers on transit connect?
I found it was a Yellow 20 Amp fuse (Fuse 56) on the Fuse board. This can be found by opening the glove box, and squeezing inwards the sides, this then drops down to reveal the fuse board. NB this was for my Transit Connect 2003.
What is the difference between 125V 15A fuse and 230V 15A fuse?
The voltage rating of a fuse (in this case 125V or 230V) defines the maximum circuit voltage that the fuse is safe to be used on. A fuse with a voltage rating of 125V should not be used in a circuit with a voltage greater than 125V. If a 125V fuse were installed in a 230V circuit and an overload current occurred, the fuse could explode.
Can you use a 125V 15A fuse to replace a 250V 10A fuse?
No, it is not safe to replace a 250V 10A fuse with a 125V 15A fuse. The voltage rating of the fuse must be equal to or greater than the system voltage, and the amperage rating must be equal to or lower than the rated current of the circuit. Using a lower voltage or higher amperage fuse can lead to safety hazards, including potential fire risks.
Where can I buy a type CES 6 125v 15a fuse in north America like close to mtl qc Canada?
Radio Shack 15A 250V Ceramic Fuse for Microwave Ovens (4-Pack) Radio Shack Stock#/Model: 270-1040
Can you use a 250v 15 amp fuse for a 125v 15 amp?
No, it is not safe to use a 250V 15A fuse in a 125V circuit. The voltage rating of the fuse should match or exceed the circuit voltage to ensure safety. Using a lower voltage rated fuse can lead to overheating and potentially create a fire hazard. Always use the correct fuse rating for your circuit.
Can you use a 15a 220v fuse for a 15a 32v FUSE?
If it fits you are fine. You are at the same current and the voltage rating is higher.
Is a 125v extension cord ok to use on a 1100w microwave oven?
Yes. It should be a 'heavy-duty' extension cord, rated for 15A or 20A .
Which fuse is for the horn in an Astra 2004?
Fuse number 10 15A
Which fuse is for the horn Peugeot 207?
F10 15a
Vauxhall vivaro 15a stop fuse blowing?
Fix the fault blowing the fuse.
Where is the 25 amp stop light fuse in a 92 Toyota Camry?
The fuse diagram of a 1992 Toyota Camry lists the stop light fuse as 15A. It is located in the first row from the left the first 15A.
Which fuse controls the horn in a Citroen C2 53 plate?
Fuse under bonnet fuse number 13 15A fuse
Are the dash light on 1999 mustang controlled by and fuse and if so which fuse works them?
There is a 5A fuse #21 and 15A fuse #5.
