Depends on what the output voltage on the converter is.
Wiki User
∙ 15y agoIt is not recommended to use a 15 watt converter for a 9 volt appliance as the voltage output may be too high, potentially damaging the appliance. It is best to use a converter that provides the correct voltage output for the appliance to ensure safe operation.
Wiki User
∙ 14y agoNo. The wattage listed is the maximum power that the adapter can supply. If you have to replace an AC adapter and can't find an equivalent model, just size it larger.
No, it is generally not safe to use a 220 volt adaptor with a 110 volt appliance. Doing so can cause damage to the appliance and may pose a safety hazard. It is recommended to use the correct voltage adaptor or converter for the specific appliance to ensure proper functioning.
To calculate the fuse rating for a 600 watt appliance on a 220 volt supply, you can use the formula: Fuse rating = (Power/Voltage). In this case, it would be 600 watts / 220 volts, which equals approximately 2.73 amps. Therefore, you would need a 3 amp fuse for the 600 watt appliance on a 220 volt supply.
A 250 volt appliance may work in a 220 volt world zone, but it is not advisable as it may result in decreased performance or potential damage to the appliance. It is recommended to use a voltage converter or transformer to safely power the appliance in a different voltage zone.
Using a 265-volt appliance on a 220-volt line can be risky and may damage the appliance, cause a short circuit, or result in a safety hazard. It is recommended to use voltage converters or transformers to ensure safe operation of the appliance.
No, it is not recommended to use a 9-volt charger for a 4.5-volt appliance. Using a charger with a higher voltage than what the appliance is designed for can damage the appliance or pose a safety risk. It is best to use the charger that is specifically designed for the appliance.
yes
No, it is generally not safe to use a 220 volt adaptor with a 110 volt appliance. Doing so can cause damage to the appliance and may pose a safety hazard. It is recommended to use the correct voltage adaptor or converter for the specific appliance to ensure proper functioning.
To calculate the fuse rating for a 600 watt appliance on a 220 volt supply, you can use the formula: Fuse rating = (Power/Voltage). In this case, it would be 600 watts / 220 volts, which equals approximately 2.73 amps. Therefore, you would need a 3 amp fuse for the 600 watt appliance on a 220 volt supply.
That appliance might last longer if you use an eight volt adapter rather than a nine volt adapter.
A 250 volt appliance may work in a 220 volt world zone, but it is not advisable as it may result in decreased performance or potential damage to the appliance. It is recommended to use a voltage converter or transformer to safely power the appliance in a different voltage zone.
Using a 265-volt appliance on a 220-volt line can be risky and may damage the appliance, cause a short circuit, or result in a safety hazard. It is recommended to use voltage converters or transformers to ensure safe operation of the appliance.
No, it is not recommended to use a 9-volt charger for a 4.5-volt appliance. Using a charger with a higher voltage than what the appliance is designed for can damage the appliance or pose a safety risk. It is best to use the charger that is specifically designed for the appliance.
No, the voltage from the adapter should match the voltage required by the appliance.
Yes this can be done. You need to look on line for a travel converter.
No, it is not safe to run a device rated for 230 volts on a 110-volt electric supply. This could cause damage to the device and pose a safety hazard. It is important to use the correct voltage to ensure proper functioning and safety.
No, the voltage is too high.
no , it will burn out