0
No. 140 volts on a 120 volt system is symptomatic of something wrong. On a 120 volt system, 120 volts is near the top end of the acceptable scale with 110 volts being on the lower end of the acceptable scale. The first thing that you should do is check your volt meter against another one to make sure that the readings are the same. Many times meters that get knocked about need to be recalibrated. If you know an electrician check your meter reading against what his shows using a common source of voltage at the time.
Wiki User
∙ 11y ago
It is not recommended to plug a device with a higher voltage (125V) into a lower voltage outlet (120V) as it can potentially damage the device or cause a safety hazard. It is best to use devices with matching voltage requirements to avoid any issues.
Wiki User
∙ 12y agoUsually it is the other way around. Devices are rated at the top end of the voltage scale. From 110 to 120 volts devices, the receptacles are rated at 125 volts. The same with 220 to 240 volts, the receptacle devices are rated at 250 volts. If you are talking about a plug (cap) device that is rated at 125 volts maximum then the answer is yes, this is quite acceptable to plug it into a 120 volt system
Wiki User
∙ 15y agoyep!
Add your answer:
Earn +20 pts
Can a 125V and 30 amp plug be used for a device that requires 24V and 50 amp?
No, the plug and device have different voltage and amperage requirements. Using a 125V 30 amp plug for a device that needs 24V 50 amp could damage the device and pose a safety hazard. It is important to match the electrical specifications of the plug and device for safe operation.
Can you plug a 125v into a 220v?
No, it is not safe to plug a device rated for 125V into a 220V outlet. This could result in damage to the device or a potential safety hazard, such as a fire or electrical shock. It is important to match the voltage requirements of the device with the voltage supplied by the outlet.
Can you plug a 125V to 220V?
No, you cannot plug a device rated for 125V into a 220V outlet directly. Doing so may damage the device and pose a safety hazard. You would need a voltage converter or transformer to safely use the device with the higher voltage.
Is it ok to use a 120v light switch in place of a 125v light switch?
It is generally not recommended to use a 120v light switch in place of a 125v switch. The voltage rating of the switch should match the voltage of the circuit to prevent potential safety hazards such as overheating or electrical arcing. It's best to use a switch that matches the voltage of the circuit.
Can you plug 15A 125V rated US power cord into 230V socket outlet?
No, it is not safe to plug a 125V rated power cord into a 230V socket outlet. The power cord is not designed to handle the higher voltage and could result in damage to the cord or connected devices, and pose a safety hazard. It is important to always match the voltage ratings of power cords and outlets to prevent damage and ensure safe operation.
Can a 125V and 30 amp plug be used for a device that requires 24V and 50 amp?
No, the plug and device have different voltage and amperage requirements. Using a 125V 30 amp plug for a device that needs 24V 50 amp could damage the device and pose a safety hazard. It is important to match the electrical specifications of the plug and device for safe operation.
Can you plug a 125v appliance into 110v car outlet?
Yes
Can you run 125v air conditioner on 120v house current?
Yes ,it's the same voltage.You have a +-5% of voltage range
Change l5-30 plug for l6-30 plug?
It's the same receptacle, except L6 is 240V rated vs 120V rated for L5 (note: The answer above is incorrect. It is true that the L6-30 is a 240V rated connector, and the L5-30 is 125V rated. However they do not share the same pins, they are similar, but one connector will not mate with the other receptacle.)
Can I plug a Toyota Camry Hybrid to any outlet?
"As far as charging the Toyota Camry Hybrid, you can plug it into any one of the standard 120V plugs.So as long as it can surge a 120V plug, then it can be used."
Is it ok to use a 120v light switch in place of a 125v light switch?
It is generally not recommended to use a 120v light switch in place of a 125v switch. The voltage rating of the switch should match the voltage of the circuit to prevent potential safety hazards such as overheating or electrical arcing. It's best to use a switch that matches the voltage of the circuit.
Can a 7a 125v plug be replaced with a 10a 250v plug?
Yes because it is of a higher rating. But make sure your equipment can take the rating too.
Can you use a 125v unnotched cable with a notched socket 120v ballast for your 1000 watt HID light fixture if you add a notch to the cord or remove the notch from the socket?
See discussion page for more.
What happens if you plug a 120V appliance into a 240V outlet?
You will burn up your appliance!!!!!
Can you plug a 120v 20 amp wielder into a 240v 40 amp outlet?
No, it is not safe to plug a 120v 20 amp welder into a 240v 40 amp outlet. The voltage difference is too high and could damage the welder. It is important to match the voltage and amperage of the welder with the corresponding outlet.
If you put a 60W 120V bulb in a 120V lamp that has a transformer for 240V and plug it into a 240V outlet will it work or blow the circuitry?
Off hand no but your explanations are not clear as to who is doing what to whom,,
Will anything bad happen if you use an accessory outlet adapter for 120v to plug your laptop in your Prius?
no.
