yes
No. A double pole switch would be a switch that switches 2 different loads simultaneously. 3-way switches (and 4-way switches if more than 2 are used) are what are used for controlling a light from multiple locations. While a typical single pole switch simply opens or closes a single contact, a 3-way switch provides a path from a contact point to, let's say, point A or point B. Points A and B from the first 3-way switch are connected to points A and B of the second 3-way switch and then the common contact point of the second switch is connected to your light. When more than 2 switches are desired, you can use any number of 4-way switches between the 3-way switches, but the 3-way switches MUST be on the ends of the circuit.
A single pole switch interrupts only one wire, which must be the live wire. A double pole switch interrupts both the live and the neutral, so it contains two separate switches operated by the same lever. Current practice is to use single-pole switches, to avoid a fault condition which could leave equipment live while switched off.
Yes. the two switches are called '3-way' switches. You will have to turn the fan/light on with one of the switches and leave BOTH switches in that position. The remote control unit will have to be wired in between the switch that is supplying power to the devices and the devices. This is the simplest way. You could also disable one of the switches and replace the remaining switch with the RC unit. If you are not sure how to deal with 3-way switches, learn about them first, or call a good electrician to do all of the work. Remeber that the black wire is hot, but only if the house was wired properly in the first place.
The switches would have to be of a type that could switch out a bulb and at the same time switch in its place a resistor of equivalent value.
Yes, a KVM switch can be used to control multiple computers using just a single keyboard, monitor, and mouse. It allows users to switch between different computers with ease, improving efficiency and reducing clutter.
No. A double pole switch would be a switch that switches 2 different loads simultaneously. 3-way switches (and 4-way switches if more than 2 are used) are what are used for controlling a light from multiple locations. While a typical single pole switch simply opens or closes a single contact, a 3-way switch provides a path from a contact point to, let's say, point A or point B. Points A and B from the first 3-way switch are connected to points A and B of the second 3-way switch and then the common contact point of the second switch is connected to your light. When more than 2 switches are desired, you can use any number of 4-way switches between the 3-way switches, but the 3-way switches MUST be on the ends of the circuit.
A single pole switch interrupts only one wire, which must be the live wire. A double pole switch interrupts both the live and the neutral, so it contains two separate switches operated by the same lever. Current practice is to use single-pole switches, to avoid a fault condition which could leave equipment live while switched off.
the switch is to control the light if this is turn on or turn off
Yes. the two switches are called '3-way' switches. You will have to turn the fan/light on with one of the switches and leave BOTH switches in that position. The remote control unit will have to be wired in between the switch that is supplying power to the devices and the devices. This is the simplest way. You could also disable one of the switches and replace the remaining switch with the RC unit. If you are not sure how to deal with 3-way switches, learn about them first, or call a good electrician to do all of the work. Remeber that the black wire is hot, but only if the house was wired properly in the first place.
It switches two separate wires with one switch throw. <<>> It is two individual single pole single throw switches mounted side by side and are enclosed in a single enclosure. The single enclosure is called a two gang junction box.
The "sw" is electrical terminology for the word "switch". A single pole switch is one that opens the circuit when in the off position and closes the circuit when in the on position. Individual switches that turn on light fixtures in your home are in the classification of single pole switches.
The switches would have to be of a type that could switch out a bulb and at the same time switch in its place a resistor of equivalent value.
To switch frames between different ports
A switch will allow you to share a single connection between multiple users with the switch handling the data between the different users. Netgear do reasonably priced switches (check out Amazon).
Yes, a KVM switch can be used to control multiple computers using just a single keyboard, monitor, and mouse. It allows users to switch between different computers with ease, improving efficiency and reducing clutter.
You cannot wire a single pole switch and 3 way switch together.
The main difference is that air break switches lack a mechanism for suppression and load break switches do have them. They are both disconnect switches but have different uses.