0
I'm not sure if I understand your question but if you are asking if the wire number is the maximum amperage (current) it can hold the answer is NO. For example #8 copper wire will allow much more current (before melting) then #12 copper wire. Generally the higher the wire number the less amps it can hold.
The ampacity of 16 AWG copper wire is typically around 10-13 amps for general household electrical wiring. However, it's important to consult the National Electrical Code (NEC) or a qualified electrician to determine the exact ampacity for your specific application to ensure safety and compliance.
Add your answer:
Earn +20 pts
Can you connect 16 ga wire to 14 ga wire for a light fixture?
It is not recommended to connect 16 gauge wire to 14 gauge wire for a light fixture. Different wire gauges have different ampacity ratings, meaning they can carry different amounts of current safely. It is best to use the same gauge wire for properly and safely conduct electricity.
What wire gauge should be used for 9 amp maximum?
A wire gauge of 16 AWG is typically suitable for a maximum current of 9 amps. However, you may also consider using a gauge of 14 AWG to provide some extra margin for safety and reduced voltage drop over longer distances.
What wire gauge is used for a toaster?
A toaster typically uses wire gauge sizes between 14-16 AWG for the power cord, depending on the wattage and length of the cord. It is important to use the appropriate wire gauge to handle the current safely and prevent overheating.
What minimum size of AWG do you need to connect a 120 Volt branch circuit that supplies a total power of 2000 Watts?
For a 120V circuit with 2000 Watts, the current can be calculated using the formula P=IV, where P is power in Watts, I is current in Amperes, and V is voltage in Volts. So, I = 2000W / 120V = 16.67A. To determine the minimum wire size, refer to the American Wire Gauge (AWG) chart to find the closest AWG size that can safely carry 16.67A without exceeding its ampacity. In this case, a 14 AWG wire can handle 15A comfortably, so a 12 AWG wire would be suitable for this application.
What copper wire gauge in transformer for 5Amp?
U can get 16 SWG
What is the maximum current recommended for 30 gauge copper wire?
Sorry, there is no such wire size as "30 gauge" in the AWG (American Wire Gauge) system. For the ampacity rating of all standard conductor sizes, go to Table 310-16 of the National Electric Code. If you mean what wire size will carry 30 amps then a #10 copper wire insulation rating of 90 degree C is rated at 30 amps.
Allowable ampacity of 10 copper thin wire rated at 75 degree Celsius?
Isn't it 35, according to the NEC 310.15(B)(16) Table.
Can you connect 16 ga wire to 14 ga wire for a light fixture?
It is not recommended to connect 16 gauge wire to 14 gauge wire for a light fixture. Different wire gauges have different ampacity ratings, meaning they can carry different amounts of current safely. It is best to use the same gauge wire for properly and safely conduct electricity.
What size wire would you use to wire a motor that draws 16 amps from a circuit?
AWG Wire Ampacity Gage (Amperes) 16 10 A 14 15 A 12 20 A 10 30 A 8 45 A 6 65 A 4 85 A 2 115 A 1 130 A 0 150 A So if anything its probably 12-14 gauge wire Yw
What size wire needed for 6amps fuse?
AWG 16
Locate petrol tank wire for gauge?
A #16 AWG will work.
What wire gauge should be used for 9 amp maximum?
A wire gauge of 16 AWG is typically suitable for a maximum current of 9 amps. However, you may also consider using a gauge of 14 AWG to provide some extra margin for safety and reduced voltage drop over longer distances.
What wire gauge is used for a toaster?
A toaster typically uses wire gauge sizes between 14-16 AWG for the power cord, depending on the wattage and length of the cord. It is important to use the appropriate wire gauge to handle the current safely and prevent overheating.
How many gauge in mm?
For wire gauge, 1.25 mm diameter wire is closest to 16 gauge (AWG). See related link.
What would be the most common wire used on residential door contacts?
Awg 16-2 how about 12/2?
What minimum size of AWG do you need to connect a 120 Volt branch circuit that supplies a total power of 2000 Watts?
For a 120V circuit with 2000 Watts, the current can be calculated using the formula P=IV, where P is power in Watts, I is current in Amperes, and V is voltage in Volts. So, I = 2000W / 120V = 16.67A. To determine the minimum wire size, refer to the American Wire Gauge (AWG) chart to find the closest AWG size that can safely carry 16.67A without exceeding its ampacity. In this case, a 14 AWG wire can handle 15A comfortably, so a 12 AWG wire would be suitable for this application.
What copper wire gauge in transformer for 5Amp?
U can get 16 SWG
