You should use a 4 guage wire. There is a handy chart located at http://www.the12volt.com/info/recwirsz.asp which lists the proper wire size for differing wattages.
Look i have a 5500 watt power acustic amp and its saids not to use nothing under 0 gauge. So use that thicker wirer mean better performance. Try it!!
he is well over a 00 gauge like everyone else thinks judging from size the day afterlife, and beast and the harlot he is about a 12mm or 1/2 inch gauge
last i seen it it was a 0 gauge
he has 00
the biggest size you can gauge your ears is as big as you can make it with out snapping your ear. gauge size goes from: 18,16,14,12,10,8,6,4,2,0,00,7/16,1/2,9/16,5/8,11/16,3/4,13/16,7/8,15/16,1" and so on. It is really endless in stretching, but take your time. and clinical studies have proven tat in 98% of the time your ear will heal as long as you don't stretch past double zero gauge size
at least 4ga wire but it would be best to get 4awg or 0awg. 4 gauge is smaller than 4 American gauge wire
2 or 4
For a 1200-watt amplifier, the appropriate gauge of speaker wire typically depends on the length of the wire run. For runs up to 50 feet, 12-gauge wire is generally recommended to handle the power without significant loss. If the run exceeds 50 feet, consider using 10-gauge wire to ensure optimal performance and minimize voltage drop. Always consult a wire gauge chart for specific applications to ensure safety and efficiency.
1200 foot propane furnace what size do i need
Look i have a 5500 watt power acustic amp and its saids not to use nothing under 0 gauge. So use that thicker wirer mean better performance. Try it!!
800 to 1200 sq.ft. would be a good size.
My home needs ventilation. What size attic fan would I need for a 1200 square foot house?
No, a pencil is not a size 0 gauge size but a 4 gauge.
If you want to go from a 14st gauge to a 12st gauge, you need larger sizes needles.
For a 30 amp breaker, you will need a wire that is at least 10 gauge in size.
Need to know the year and engine size.
For a dryer installation, you typically need a 10-gauge wire.