answersLogoWhite

0


Best Answer

4.0 inline 6: 1999 and later, 1/4-20 bolts 84 inch-lbs, 5/16-18 bolts 132 inch lbs. Or inch lbs x 0.083=ft lbs thus, 1/4-20=7 ft lbs and 5/16=11 ft lbs. 5.2 and 5.9 V8 18 ft-lbs. or ft-lbs X 12= inch lbs. 4.71 V8 132 in-lbs.

User Avatar

Wiki User

15y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

12y ago

77 foot pounds

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What is the torque specs for the brake caliper mounting bolts on a 99 Jeep Grand Cherokee?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

2000 grand Cherokee caliper mounting pin to pin?

00 Jeep Grand Cherokee, measurement of caliper from pin hole to pin hole.


What size socket is needed to take the rear caliper mounting bolts off a 1999 grand Cherokee?

E12 external torx


Where are caliper bolts on 2004 Jeep Grand Cherokee?

caliper bolts are the two bolts that hold a brake caliper to the caliper mounting bracket. On both the front and rear of the vehicle (unless has rear drum brakes) the bolts have rubber boots around them working as slide pins.


What is the caliper mounting bracket bolts torque spec for an 2004 Pontiac Grand Am?

Front caliper bracket to knuckle, 85 ft lbs. I also use a drop of blue "Loctite" thread locker on clean threads.


How do you change the front brake rotors on a 1996 jeep grand Cherokee?

Should peel off" Remove wheels Remove caliper mounting bolts Slide caliper off rotor Rotor should slide off hub


What is a ckp mounting bolt on a jeep grand Cherokee?

Crankshaft position sensor mounting bolt.


How do you install rotors on 2002 Dodge Grand Caravan?

Remove brake caliper and then caliper mounting frame . Rotor is now free.


Will a 97' Grand Cherokee torque converter fit a 93?

No.


Where is the torque Converter clutch on 97 jeep Grand Cherokee Laredo?

It is inside the torque converter.


What is the front wheel bearing torque spec for 1996 grand Cherokee?

It is 175 ft lbs for the front wheel bearing of a grand cherokee


Is there a drain plug on a torque converter for a 95 jeep grand Cherokee Laredo?

No. The torque converter does not have a drain.


How do you compress rear brake caliper on 1996 Jeep Grand Cherokee?

I have used a large "C" clamp, to compress the caliper flush to the face.