answersLogoWhite

0

It's a trick question. The gross weight would be the loaded weight (combined weight of both the truck itself AND its load). The empty weight would be the net or TARE weight.

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

What is the Gross Weight of a Ford F9000 dump truck?

empty weight


What is the gross vehicle weight of an empty 1975 international dump truck.?

It's a trick question - gross weight is the loaded weight. The weight of an empty vehicle would be the tare weight. This would depend on exactly what model International it was, as well as the configuration (single axle, tandem, tri-axle, etc).


What is the curb weight of a empty 87 ford f700 chipper truck with a 11ft dump box and 370gas motor single axle. I dont want the gross vehicle weight I know that is 24500 I want the empty weight?

10,750lb +/- 1,500lb


What is the empty weight of a triaxle dump truck?

20.000 - ~25,000, depending on specifics.


Mass of ten-wheeler truck?

You mean a tandem axle straight truck... typically, the allotted Gross Vehicle Weight Rating for these ranges from 52,000 - 54,000, depending on wheelbase. The tare (empty) weight really depends on the configuration... a flatbed truck would likely weigh between 20,000 and 24,000 empty.. a dump truck, 22,000 - 25,000, a roll-off would be around 33,000 with a 30 yard can, etc.


What is the gross weight of a 1980 Mack dump truck?

The gross weight of a 1980 Mack dump truck typically ranges between 26,000 to 33,000 pounds, depending on the specific model and configuration. Factors such as the type of chassis, engine, and any additional equipment can influence the overall weight. It's important to refer to the manufacturer's specifications for precise figures.


What does the GVW on a truck mean If you had a triaxle dump truck with a GVW of 60000 does that mean your truck can weight up to that much what if you decided to pull a trailer that weighed 20000?

GVW is gross vehicle weight which is different than GCWR (gross combination weight rating). Pulling a trailer weighing 10 tons should not cause you any problems. However I am assuming you have your dump tagged at a little less than 55,000 to avoid paying heavy use tax. Even if this is not the case and you have tagged it for a heaver weight be aware that pulling that trailer while dump and trailer are loaded may put yousignificantly over your tagged weight. Just watch your gross weight or you can re-tag your dump for 80,000. When GCWR is not available on the power unit DOT will add the GVW for the dump and the trailer to get a GCW (gross combination weight).


Tell me gross veh weight of 1993 F350 dump truck?

I have a diesel 4x4 that has dual wheels. It weighs 8300 lbs.


How much does a empty 1999 4700 International dump truck weight with a 33000 gvw?

14,000 - 16,000 lbs., depending on specifics.


What is the weight of a empty dump truck?

Depends on a number of factors, such as make and model, type of dump body, powertrain, material the dump body is made of, PTO system, other attachments, etc. For a tandem axle, on-highway dump truck, you're looking at between 20,000 and 25,000 lbs.


How much does a f700 dump truck weigh?

All things dependent, you'd probably be looking at 13,000 to 16,000 lbs. If you need a precise empty weight, my suggestion would be to scale out empty at your nearest truck stop.


Do you have to have a CDL license to drive a single axle dump truck with hydraulic brakes?

Not if it has a Gross Vehicle Weight Rating of 26,000 lbs. or less.