answersLogoWhite

0


Best Answer

Failed water pump bearing.

User Avatar

Wiki User

14y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What causes the fan and the pulley on the water pump to wobble on a 96 jeep grand Cherokee?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What causes the fan and the pulley on the water pump to wobble on a 2001 jeep grand Cherokee Laredo?

The bearing in the water pump has failed and the water pump will need replaced.


How do you check the cooling fan in a 96 Grand Cherokee?

its a pulley fan, it never goes bad


How do you know what the pulley is called that is frozen up on your 1993 grand Cherokee Laredo?

What device is it attached to?


What causes a 98 jeep grand Cherokee left wheel to wobble?

First jack up the front wheels off the ground and check all suspension parts for play.


How do you install a power steering pulley in a 1997 jeep grand Cherokee v 8?

With a special tool available at most parts stores. The tool prresses the pulley on.


What size socket to use to take off harmonic pulley for 1995 grand jeep Cherokee 5.2L?

1.25 inch


What kind of water pump is on a 97 Jeep Grand Cherokee bolt or press?

Original pump would have a bolted on pulley.


What causes a 2001 Grand Cherokee's signal to fail intermittently?

Bad flasher?


Black smoke coming out of 98 grand Cherokee what causes this?

02 sensor


Why does my 1994 jeep grand Cherokee shake severely after hitting a bump?

It's referred to as Death-Wobble. That's a problem with your steering component's Have someone check your Tie rod, tie rod ends and drag link along with your hub barrings. The wobble will only get worse, to the point of going into the wobble in a curve.


What causes windshield on 1996 grand Cherokee to fog up?

bad heater core.


Bad tensioner pulley cause overheating in Jeep Grand Cherokee?

Yes, if the belt tension is not tight enough it won't spin the radiator fan due to slippage. Replace the tensioner pulley.