yes. once you put the code in press the sc button
An answer to your question according to the book you are to turn the radio on and leave it on and you will see the message(waiting) it will stay like that for 15 minutes then the sreen will turn to code which at this point you may enter the code and it will work again. Good luck. In case you lost your code and unless you know the radio serial number (you can remove the radio and see the no behind the set) the fastest way to get your code back is to go to www.radio-code.co.uk. Follow the instruction and for 8.99 british pound (yes you have to pay for the service) you will get the right code instantly. It works for my BECKER car radio. Believe me it works.
yes jot your vin number located in the widscreen by the dash and call dealership with that number,bingo they will give it too you for free nyourt
If you have a becker put in four codes then press your up and down key on the right side of your radio
how do I remove the dashboard from a Mercedes c 280 1995?
If you mean you cannot read the display on your mileage, odometer, and other items go to http://www.bba-reman.com/
You will need to push EC button and adjust the temp.
its a security feature and you will need the radio code to unlock it.
I guess technically the radio is still receiving broadcasts, but without an amp, you can't get them to be heard.
You first should check the fuse for the radio and make sure it is not out. It may be that your radio has gone bad and may need to get a new one.
An answer to your question according to the book you are to turn the radio on and leave it on and you will see the message(waiting) it will stay like that for 15 minutes then the sreen will turn to code which at this point you may enter the code and it will work again. Good luck. In case you lost your code and unless you know the radio serial number (you can remove the radio and see the no behind the set) the fastest way to get your code back is to go to www.radio-code.co.uk. Follow the instruction and for 8.99 british pound (yes you have to pay for the service) you will get the right code instantly. It works for my BECKER car radio. Believe me it works.
most likely the radio is not grounded properly. 90% of the time this is the answer to your question. ( former sterio installation tek).
All radio codes are vin number specfic. Ask your local dealer to give you the code. They will ask you for your vin(vechile idenity number)
Likley it's a pull-style latch hidden in the grill, outside the cabin.
c280 fuse diagram