The toe in and out or a grand Cherokee is not adjustable. However if for some reason you do need to change it the only way is to purchase new ball joints which are off centre so by turning these you can adjust accordingly. These were fitted as an option and are only available from main dealers
That is not correct.
The '96 ZJ has an inverted Y setup. Adjusting toe in is as simple as rotating the adjustment collar on the tie rod. Most people run 1/16" to 1/4" toe in. IIRC factory spec is 1/8" toe in.
It keeps the front axle in the correct left to right alignment.
as far as i am aware they should do tere the same hemi mote from 92 till 97
It is 175 ft lbs for the front wheel bearing of a grand cherokee
1996
What's the question?
It keeps the front axle in the correct left to right alignment.
No, the Grand is different from the Cherokee.
as far as i am aware they should do tere the same hemi mote from 92 till 97
yes it will
No. They are not interchangeable.
No.
No. Different shape.
No, the 1994 has a hydraulic governor while the 1996 has an electronic governor.
Need to know what part you are trying to fit.
No.
YES....
yes