I am doing it right now actually. Remove the dust plate (I am installing a new transmission), and get the bolts on from the front. Facing the vehicle, the biggest opening will be on the right side. It's not easy, but it has worked for me many times. Good luck
205
Their are 2 main bolts that hold on a thermostat housing for an 1987 jeep cheorkee pioneer!!
Like A Rock
The shift solenoids are on the valve body inside the transmission. They are one of many things that can prevent the shift into overdrive.The shift solenoids are on the valve body inside the transmission. They are one of many things that can prevent the shift into overdrive.
There are 6 bolts that hold the transmission to the 4.3L block.
Generally there is six bolts holding the transmission bellhousing to the engine block. There are several more holding the torque converter to the flex plate and the rear transmission mount to the crossmember.
11 including five mount bolts
There are many bolts that assemble a transmission, automatic or standard. Be more specific.
how many mounting bolts on 1997 3500 chevy 6.5 diesel manual transmission
There are 6 bolts that holds the transmission to the engine.
There are 8 bolts on a manual transmission '97 Chevy with a 6.5 diesel engine.
one.
This will depend on how many bolts it has. If the vehicle has 13 bolts you will need a THM400. If it has 16 bolts it will need a THM700-R4.
The transmission mount is underneath the crossmember next to where the driveshaft hooks up. depending on which mount you have determines how many bolts you have to pull out. It should be about a 15 min job from the time you jack up the car until the time the mount is out.
transmission to block 6 bolts. two on each side on on top center and then one of the mid holes. cant remember left or right
If you are asking how many bolts hold it to the engine, Then it is 6 2 on the top and 2 on each side. If that was not your question then PLEASE ask it again.