amps like.. amplifiers? it depends on how many speakers you have. or amps like.. current draw? again. depends on your power needs, your power amps... ect
22 (1.5 volts each) AA batteries
1.25 amps
there are many good amps for country, but one of the best amps ever for that style is the fender twin reverb (85 watts, 2x12 in. speakers, $1300) or the fender super reverb (40 watts, 4x10 in. speakers, $1400) both are all tube amps
It depands on the power of the loudspeakers.
Depends on the load, and on how the cells are hooked up, series or parallell.
350
The amperage drawn from batteries is governed by the connected load. The voltage of the batteries can be one of two voltages. in parallel the 8 batteries will give you a voltage of 6 volts. In series the 8 batteries will give you a voltage of 48 volts. The amp/hour capacity of the batteries will give you the amount of current the device can draw over a specific length of time. Equation to fine amperage is I = W/E, Amps = Watts/Volts. Watts = Amps x Volts.
Four volts are available to the circuit when two 2-volt batteries are connected in series. This is because the voltages add up when batteries are connected in series.
A 10 amp charge will only output 10 amps and 12 volts. So, if you want to charge thee 12 volt batteries hooked in series you will have to disconnect the positive cable from each battery and charge then individually. You cannot charge three 12 volt batteries hooked in series. That requires a 36 volt charger.
Rather trying to explain all the technology that goes into battery construction, go to Related Links. All your questions will be answered there. AH means Amps Hour every battery has that term stated What it means is so many amps can be supplied for so many hours. Means amps Vs time
Similar batteries are rated 0.90 Ah
The specification calls for 650 cold cranking amps (CCA) - but with batteries: more is better.
3 AA batteries provide about 4.5 volts. The amps depend on the load but for D-cells a load of 10 amps can be sustained for short periods.
It depends on the load and desired voltage. The voltage adds as you put batteries in series. Positive to negative, etc.
The amps that a four gauge wire will handle will depend with the thickness of the wire. If the wire is thin, the four gauge will handle 95 amps.
They're 12 volt systems, typically with four batteries wired in parallel, rather than series - this keeps the voltage at 12v, while making available the full amperage of all of the batteries.