You will need a pneumatic planishing hammer. About two and a half inches in from the out-side you need to center the hammer and go around the cymbal until it is curved up all the way around at about 45 degrees. Also to get the proper sound it will need to be a thin ride, a crash would most likely work better.
2 together is a Hi Hat. 12" or less is a splash. 14" to 18" is a crash. 20" or more is a ride. If it has bent sides it is most likely a china, which are usually 16" to 20". Sometimes you can get something called a crash ride, this is usually 18". There are all sorts of weird or unusual cymbals that make different sounds in addition to the ones listed above.
ride, crash, hi hat and sometimes a splash or a china cymbal. personally, i'd go with Zildjian
crash cymbal - The most common cymbal, medium-large sized with a sound most easily described as "average" for a cymbal. Ride Cymbal - commonly though of as the jazz cymbal, this one tends to be rather large and has a calmer sound. Unlike the crash, hitting it harder does not produce a good sound and instead it is usually tapped lightly. It has a softer, more atmospheric sound. Think Milles Davis Cool Jazz era. Crash-ride cymbal - this cymbal is a fusion of the crash and the ride cymbals. China Cymbal - this cymbal is rather rare, and is similar in size to the crash, but curves sharply upward halfway out from the center. It has a very trebly sound people often associate with eastern music, hence the name. Splash Cymbal -Usually the smallest cymbal in a set, this guy is often used as a gimmick. It's basically a crash cymbal but only a third of the size, so it's sound is quieter, higher, and "splashier". Hi-hat - This cymbal is actually two small/medium sized cymbals mounted atop each other, with the concave side pressed into each other. They are mounted on a post set up so that a pedal on the floor can either press the cymbals tightly into each other, or allow them to loosen to the point that they barely tough. It is an essential part of most rock kits and patterns, often being hit on every eighth note in the measure.
A cymbal that produces a sharp, loud sound that is used in every style of music. Crash cymbals are made in many different sizes, styles, and thicknesses, and can make many different sounds. Crash cymbals can be used for accents, or to drive the beat.
A Zildjian Sweet Ride, Zildjian K Ride Cymbal, Custom Ride Cymbal, Series Ping Ride Cymbal, Series Medium Ride, Dark Ride Cymbal, Crash/Ride Cymbal, and other ride cymbals are available.
A crash ride cymbal is a type of cymbal that can be used for both crashing and riding (playing a steady rhythm). It is larger and heavier than a regular crash cymbal, allowing it to produce a louder and more sustained sound when crashed. The bell of a crash ride cymbal is also usually larger and more pronounced, making it suitable for riding patterns.
The main difference between a crash cymbal and a ride cymbal is their sound and purpose. A crash cymbal produces a quick, explosive sound used for accents and fills, while a ride cymbal has a more sustained sound and is used for rhythmic patterns and keeping time in music.
2 together is a Hi Hat. 12" or less is a splash. 14" to 18" is a crash. 20" or more is a ride. If it has bent sides it is most likely a china, which are usually 16" to 20". Sometimes you can get something called a crash ride, this is usually 18". There are all sorts of weird or unusual cymbals that make different sounds in addition to the ones listed above.
The main difference between a ride cymbal and a crash cymbal is their sound and purpose. A ride cymbal has a more sustained and defined sound, often used for rhythmic patterns and keeping time in music. On the other hand, a crash cymbal has a quick and explosive sound, typically used to accentuate certain parts of a song or create a dramatic effect.
A Chinese cymbal is an instrument that makes a dark explosive tone. A crash is also an instrument that is round and thin and make a high pitch sound. So it really is up what the person on whether to get a Chinese cymbal or a crash.
A ride cymbal has a sustained, pingy sound and is used for keeping a steady rhythm in drumming. A crash cymbal has a loud, explosive sound and is used for accents and adding intensity to music.
crash
A crash cymbal is a type of cymbal in a drum kit that produces a loud, explosive sound when struck with a drumstick. It is used to add emphasis, accents, and dramatic effect to the music being played.
The crash cymbal is used for loud, explosive accents, while the ride cymbal is used for a steady, rhythmic pattern.
ride, crash, hi hat and sometimes a splash or a china cymbal. personally, i'd go with Zildjian
crash cymbal - The most common cymbal, medium-large sized with a sound most easily described as "average" for a cymbal. Ride Cymbal - commonly though of as the jazz cymbal, this one tends to be rather large and has a calmer sound. Unlike the crash, hitting it harder does not produce a good sound and instead it is usually tapped lightly. It has a softer, more atmospheric sound. Think Milles Davis Cool Jazz era. Crash-ride cymbal - this cymbal is a fusion of the crash and the ride cymbals. China Cymbal - this cymbal is rather rare, and is similar in size to the crash, but curves sharply upward halfway out from the center. It has a very trebly sound people often associate with eastern music, hence the name. Splash Cymbal -Usually the smallest cymbal in a set, this guy is often used as a gimmick. It's basically a crash cymbal but only a third of the size, so it's sound is quieter, higher, and "splashier". Hi-hat - This cymbal is actually two small/medium sized cymbals mounted atop each other, with the concave side pressed into each other. They are mounted on a post set up so that a pedal on the floor can either press the cymbals tightly into each other, or allow them to loosen to the point that they barely tough. It is an essential part of most rock kits and patterns, often being hit on every eighth note in the measure.
The main differences between a ride cymbal and a crash cymbal are in their sound, function, and usage in drumming. Sound: A ride cymbal has a more sustained and defined sound, often used for rhythmic patterns and keeping time. A crash cymbal has a quick, explosive sound, used for accents and adding intensity to music. Function: The ride cymbal is typically used for maintaining a steady rhythm and providing a consistent beat in a song. The crash cymbal is used for adding emphasis, accents, and dramatic effect to certain parts of a song. Usage in drumming: Ride cymbals are commonly used in jazz, rock, and other genres where a steady beat is required. Crash cymbals are used to highlight transitions, climactic moments, and to add energy to a song.