Radio controlled watches use radio waves that are set by synchronizing a time code that are transmitted by a radio transmitter. These radio controlled watches are used to set and display the time accurately.
To set the time hit the mode button until the display reads H-set then hit adjust, then use the forward button to set the hands. It only goes one way and takes a while if you miss the time u have to go around all over again. To set the time in the display window hit the mode button until the date shows then hit the adjust button then use the forward button then hit adjust to set. To reset the the stop watch and timers hit the forward then the adjust right after to set it back to zero. Set the alarm to the setting of 00:00 to turn all alarms off it is a preset in the menu when u forward through them.
I HAVE A ATHLETIC WATCH FROM WALMART BIG FACE AW150 MODEL THAT WENT INTO MILITARY TIME. I HAVE THE INSTRUCTIONS BUT IT SAYS NOTHING ABOUT SETTING MILITARY TIME. HOW DO I GET IT BACK TO NORMAL TIME When the hour is set the watch goes through two sets of 24 hour choices, one set for regular time, one for military time. After pressing the lower left button three times and the lower right button once you are setting the hour of the time. When an 'H' appears to the right of the time, these are the military hour choices. Keep pressing the upper right button until the 'H' disappears (an 'A' appears to indicated AM hours), then the hours depicted are regular time hours. When the correct hour appears press the lower right button.
Personally, I watch Horror films all the time even though they scare me.
To set the alarm: Press and hold the MODE button for about three seconds and the alarm hour will blink. Pressing START/STOP will toggle between hour and minute. Pressing LAP/RESET will change the digit. After setting the alarm, pressing MODE again will save the setting. To set the time and date: Press and hold MODE button for about three seconds and the alarm setup will be displayed. Press MODE again and the time setup will be displayed. Pressing START/STOP toggles between hour, minute, month, day, and day of the week. Pressing LAP/RESET changes the digit. Press MODE again to save the setting. To choose between 12 and 24 hour mode, press MODE while holding LAP/RESET. When "A" is displayed, watch is in 12 hour mode. To choose the date format eg.mm/dd, or dd,mm. press LAP/RESET while holding START/STOP. Format is displayed.
You pull out the crown once to change the date, twice the change the time
How do I set the date on a cardinal watch?
How do you set the time & date on diesel watch DZ-7069
Pull out the stem and turn to set the time. If the watch has the Date or both Day and Date, you pull the stem out half way to set those.
To set the time on a Rolex Day-Date watch, gently pull out the crown to the first position and rotate it to set the date. Pull the crown out to the second position and turn it clockwise to set the time. Finally, once you have set the time, push the crown back in to the original position to complete the process.
To set a Philip Persio watch, first pull out the crown (the small knob on the side of the watch). Turn the crown clockwise or counterclockwise to set the time and date. Push the crown back in once you have set the time and date to the desired positions.
To set the time and date on a Nixon watch, pull the crown out to the furthest position. Turn the crown to set the time, and push it back in one notch to set the date. Make sure to press the crown all the way in to secure your settings.
The procedure to set day and date on a Tommy Hilfiger watch is simple. There are buttons the side of the watch to help to set these features.
On the back of the watch you can stick your fingernail (or a very small screwdriver) under the little thumbscrew and push it up. Then you can set the watch by turning the thumbscrew. When finished, push the thumbscrew back down. You can also check the site: www.relicbrand.com but for most pocketwatches you have to pull out the turning mechanism that is right next to the button that opens the watch so you can see the time. Just pull it out all the way and change the time, Half way to change the date.
To set the time on a Titan Fastrack watch: Pull out the crown of the watch to its second position. Turn the crown clockwise or counterclockwise to adjust the hour and minute hands to the desired time. Once the correct time is set, push the crown back in to its original position to secure the time setting.
To set the date and weekday on a Cardinal watch, you typically need to pull the crown out to its second position (the time-setting position) and then rotate the crown to adjust the date and weekday display. Refer to your specific Cardinal watch's manual for detailed instructions as the process may vary depending on the model.
Okay, the relic is at the cellar. You enter under the stove in the kitchen. Once you're at the cellar don't leave 'cause the relic won't be there anymore the second time you go back and you'll have to exit the game and try again. The relic is at the upper rightmost part of the room. Victor is prowling around the table there so watch out and don't get caught. Alright, you're set. Good luck in getting the third relic.