answersLogoWhite

0


Best Answer

Press mode key at any time to exit.

Press mode, then press adjust to change time zones.

TO SET TIME AND DATE:

Press and hold alarm on/off for about 5 seconds until hour flashes.

Press adjust to change hour.

Press alarm on/offto move to minutes. Press adjust to change minutes

Press alarm on/offto move to seconds. Press adjust to change seconds

Press alarm on/offto move to month. Press adjust to change month

Press alarm on/offto move to date. Press adjust to change date

Press alarm on/offto move to day of week. Press adjust to change day of week

Press mode key to save to exit.

TO SET ALARM:

Press mode to go to alarm screen (AL shows above temp)

Hold the alarm on/off button for about 5 seconds and the hour will flash.

Press the adjustbutton to change the hour.

Press the alarm on/off button again to move to minute

Press the adjustbutton to change the minutes

Press the mode key to save and exit

User Avatar

Wiki User

14y ago
This answer is:
User Avatar
User Avatar

Anonymous

Lvl 1
4y ago
Thanks to your instructions my clock is finally set correctly! 
More answers
User Avatar

Wiki User

16y ago

Press and hold the "set" button briefly. When the display changes, use the "set" button to cycle through the choices. The current time zone setting will display in one of the upper corners. Press the "+" button until "EST" displays. If you don't press any buttons after this point, the clock will return to normal mode, using Eastern Standard time.

This answer is:
User Avatar
User Avatar

Sam Albro

Lvl 1
1y ago
Not on that model.

User Avatar

Wiki User

11y ago

First, push the "set" key located on the front of the clock to activate the minute place holder. Then, push the "+" key to scroll to the correct minute. Finally, push the "set" key again to exit the setting mode.

This answer is:
User Avatar
User Avatar

Sam Albro

Lvl 1
1y ago
not on that model

User Avatar

Wiki User

15y ago

Call the manufacture (Equity Time) at 925-373-7900 and press extension 2. The customer service person should be able to answer your questions. The name "SkyScan" is confusing because there are two companies selling products with the same name. In your case (an mine), this model is made by Equity Time. Best wishes.

Or use these (I found my instruction sheet):

The unit automatically receives the time signal everyday at midnight and makes any required adjustment to the time displayed.


The WAVE OK indicator and the Tower Icon on the display will show if the time signal is successfully received or after manually pressing the SET/WAVE button

You can trigger a Signal Receive operation at any time by pressing the SET/WAVE button, which will activate the Signal Search function of the unit.

To Manually Set the Clock
To Set the Year and Date
1. Press SET/WAVE button after setting TIME ZONE and DST
2. Press + or - button sequentially to set the year (holding down the button will change the year at a high speed)
3. Press SET/WAVE button to confirm the year set and start the date process
4. Press + or - button sequentially to set the current date (holding down the button will change the date at a high speed)
NOTE: The weekday changes automatically depending on the year and date

To Set the Time
1. Press the SET/WAVE button after setting the calendar
2. Press + or - button sequentially to set the minutes (holding down the button will change the year at a high speed)
NOTE: Once you the press + or - button, the seconds will reset to 00

To set the 12/24 HR mode and the Temperature Mode
1. Press SET/WAVE button after setting the time
2. Press the + button to toggle between between 12HR and 24HR (military) modes
3. Press the - button to toggle between C and F temperature display mode
4. Press SET/WAVE button to confirm and quit the set mode
This answer is:
User Avatar

User Avatar

Wiki User

10y ago

press "mode" until the alarm time shows. then press "set." every time "set" is pressed, the timezone shifts from west to east. the default timezone seems to be west on my clock, but most instructions I've found online say that default is east. I'm not sure why that is.

This answer is:
User Avatar

User Avatar

Wiki User

14y ago

How do I get a new outdoor transmitter for my skyscsn clock thermometer?

This answer is:
User Avatar

User Avatar

Wiki User

15y ago

1. press "MODE" (it will show the alarm time) 2. press "ADJUST" (this will switch the time zones) 3. when it is on the desired time zone, press "MODE" to return to the clock.

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you set skyscan Atomic Clock model 38229-1?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Music & Radio

Instuctions for SkyScan Atomic clock model 87801?

This doesn't answer the question. We can't refer them to another link. Please revise, remove this comment, and resubmit. The instructions for the SkyScan Atomic clock model 87801 can be found here in the form of a .pdf document: skyscanatomicclocks.com/manuals/87800-01.pdfAlso included in this manual is the 87800 model; this manual covers both clocks.


Instructions for SioScan atomic clock Model 86715?

Well, honey, first things first - find the manual. Then, set the time zone, date, and time using the buttons on the clock. Make sure to place the clock in an area with good reception for the atomic signal. And voila, you've got yourself a perfectly synced atomic clock. Now go out there and conquer the world, one precise second at a time!


How do you find instructions for Sharper Image atomic clock model LM521?

i set my Sharper Image atomic clock model LM521 and it works for several hours but then the time changes to several hours off. clock is plugged in wall and has batteries. no ower surges, etc.


Is there an atomic clock radio that supports Atlantic Standard Time AST brand name and model please?

yes


How do I set the time for a Scan atomic clock model 87315?

You should not need to as it will attempt to set itself automatically from the WWVB radio signal transmitted by NIST in Colorado. Most clocks of this type won't let you set them manually, but this one will.In case the atomic clock is not able to detect the WWVB radio signal (disturbances, transmitting distance, etc.), the time can be manually set. The clock will then work as a normal Quartz clock.The hour digits will start flashing on LCD1.Set the desired hours by pressing and releasing the + key followed by pressing the SET key.Now the minute digits will start flashing.Set the desired minutes by pressing and releasing the + key. If the + key is held, the units will increase by 5.Press and release the SET key to move to the "Year Setting".

Related questions

How do you find instructions for SkyScan Atomic Clock model 31310?

http://skyscaninfo.com/content/manuals/33-model-31310t.html


SkyScan Atomic clock model 86715?

The SkyScan Atomic Clock model 86715 receives radio signals from atomic clocks to stay accurate. It automatically adjusts for Daylight Saving Time and has a large display for easy reading. It also features an alarm with snooze function.


Instructions for skyscan atomic clock model 26600?

To set the time on the Skyscan atomic clock model 26600, press the "SET" button until the time zone is displayed on the screen. Use the "+" and "-" buttons to adjust the time zone, and press "SET" again. The clock should then synchronize with the atomic time signal and display the correct time.


Instuctions for SkyScan Atomic clock model 87801?

This doesn't answer the question. We can't refer them to another link. Please revise, remove this comment, and resubmit. The instructions for the SkyScan Atomic clock model 87801 can be found here in the form of a .pdf document: skyscanatomicclocks.com/manuals/87800-01.pdfAlso included in this manual is the 87800 model; this manual covers both clocks.


How do you find instructions for the Skyscan atomic clock model 87315?

You can typically find instructions for the Skyscan atomic clock model 87315 by visiting the manufacturer's website and searching for the specific model number. Look for a "Support" or "Manuals" section on the website where you should be able to download a digital copy of the instructions. Alternatively, you can contact the manufacturer directly for assistance.


Model86722alu outside temp not working readsofl?

Skyscan Atomic Clock Model 86722ALU needs a reset after a battery change, or needs a battery change.


Skyscan atomic clock model 86722ALU instructions?

To set the time on the Skyscan Atomic Clock model 86722ALU, first, insert the required batteries. Make sure the clock is in the Time Zone mode. Press and hold the SET button until the time zone begins flashing. Use the + and - buttons to adjust the time to your correct time zone. Press the SET button to confirm.


How do you find insructions for Skyscan atomic clock model 87315?

To find instructions for the Skyscan atomic clock model 87315, you can visit the manufacturer's website and look for a downloadable manual in the support section. You can also try contacting the manufacturer directly for a digital or physical copy of the manual. Additionally, you may find user-generated guides or videos online that provide step-by-step instructions for setting up and using the clock.


Instructions for SioScan atomic clock Model 86715?

Well, honey, first things first - find the manual. Then, set the time zone, date, and time using the buttons on the clock. Make sure to place the clock in an area with good reception for the atomic signal. And voila, you've got yourself a perfectly synced atomic clock. Now go out there and conquer the world, one precise second at a time!


How do you set the inside temp on SkyScan automatic clock model?

To set the inside temperature on a SkyScan automatic clock model, you will typically need to press a "Mode" or "Set" button on the clock and then use the arrow keys or "+" and "-" buttons to adjust the temperature. Refer to the user manual specific to your SkyScan model for detailed instructions.


Is the SkyScan 30731 Atomic LED Alarm Clock still available anywhere?

I was unable to find any online retailer who had that specific model (SkyScan 30731) in stock. I did a google search as well as visiting several well-known online retailers (Amazon, Best Buy, eBay, buy.com, etc). There were some places that had other models in stock but not that one specifically


Where do you find a replacement transmitter for a SkyScan atomic clock and weather station model 81690?

Send a letter explaining the problem with $5.00 and the unit to: Customer Service Dept., Equity Industries Corp. 5721 Bayside Rd., Virginia Beach, Va. 23455