How do you replace the radiator fan control relay on a 1999 Jeep Grand Cherokee Laredo?

Answer 1

The radiator fan control relay on the 1999 Jeep Grand Cherokee Laredo is located BEHIND the passenger side front head lamp housing through a cut out square hole. You gain access to the fan motor relay by initially following the instructions for changing a head lamp bulb in the owners manual. Once you detach the head lamp housing from vehicle frame, look through the square hole in the frame. The OEM relay has a square sky blue labling. It's recommended that you apply electrical grease to surface in order to help prevent corrosion, moisture, and enhance conductivity when replacing.

where is the emission control system in my 1999 Jeep grand Cherokee Laredo?

Answer 2

Behind the bumper under the headlight on the driver side you will see the relay pull it out and get another one and put it in. Its like a big fuse with 5 connectors.

Answer 3

You have to remove the right headlight assembly, the relay is located underneath the plastic housing below the headlight You can cut a small hole in the housing to gain access to the relay

Answer 4

best easiest way is pull ft bumper cover , under right headlight you will see module , long 1/4 inch extension and swivel 8 mm socket will take care off it.